Three pipettes (up to 1000 μl) can be charged simultaneously.

Improved process reliability with functional validation of air-displacement pipettes.The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds.Limit values for the commercially available single- and multichannel pipettes in the volume range 1µl to 10ml are pre-programmed.Testing with and without tips Test results in secondsPatent pendingAccording to monitoring of measuring instruments, air-displacement pipettes must be checked at regular intervals and the results must be compared with the ISO 8655-2 error limits. However, a calibration certificate only reflects the results at the time of testing. The time between these calibrations is crucial, since leaks can occur at any time. Well over 80% of pipettes sent in for repair have leaks and are outside their volume tolerances, even if they don't drip.While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected. Process reliability for the pipettes is thus significantly improved.Items supplied:PLT unit (Pipette Leak Testing Unit) including one adapter each for testing air-displacement pipettes with tip (mounted) and without tip, 2 plugs, 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual.

To prevent spring action in multichannel pipettes.

Unlocking tool to open the lower parts of 1200 µl multichannel pipettes.

5 ml protective filterWith 1 filter sleeveFor variable volumes from 0.5 to 5 mlColour code: violetCompatible with Research plus, Reference, Reference 2 and Xplorer micropipettes

Drawer organiser suitable for graduated and bulb pipettes. 

For pipette carousel or wall mounting, incl. adhesive tape, without charging function.

For storing up to 6 Eppendorf LiquidTouch® models. Up to four pipettes can be charged simultaneously.

Charging stand with one charging shell for storing and charging Eppendorf LiquidTouch® models.

For charging carousel 2 or charging stand 2, with charging function.

Static, space saving stand for storing one IKA PEN pipette.

A wireless control button that can be attached to the IKA PEN electronic pipette or used as an alternative control button independently of the device.

Pipettes hang vertically, preventing liquids from contaminating the pipette shaftFits both single and multichannel xPIPETTE modelsHolds 7 pipettes total

With rotating head, for up to seven single or multichannel pipettes.

Frame for pipettes with two rotating perforated plates and drip pan. For drying and space-saving storage of pipettes, thermometers and test tubes. The holders are suitable for up to 40 pipettes up to a max. diameter of 18 mm .RotatableVery sturdy pedestalMagnetic concept, no clamping screws necessaryAdjustable height up to 450 mm

For 8 pipettes with a diameter of up to 7 mm and 8 pipettes with a diameter of up to 15 mm. Base equipped with small drainage holes for liquid runoff.

The protective filters prevent any liquids or vapors from reaching the internal components of the pipette.Reduce the risk of contaminating of the pipettesProlong the pipette's lifetimeLess maintenance requiredMore cost-effective compared to filter tipsPer filter up to 250 pipettingsStandard filters for general applications.Plus filters for more demanding applications such as cell culture, molecular biology, radioactive and microbiological work.

3-, 4-, and 6-place pipette stands are designed to hold most major pipette brands.

For electronic pipettes or battery packs.

3 positions, for battery packs only.

Pipette carousel for 6 manual or 3 electronic pipettes.For single- and multichannel pipettesSingle slot for each pipetteStable crossbar constructionWith cover

For Thermo Scientific Finnpipette™ Novus pipettes.

Transparent. Holds up to three PIPETMAN® pipettes.

For holding a single or multichannel PIPETMAN® pipette. The pipette holder adheres strongly to any smooth, dry surface or may be fastened with screws.

For two Acura® and Calibra® micro and/or multichannel pipettes.Material: polycarbonate (PC). Maintenance: clean with mild detergent. Not autoclavable.