Heating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch.Cool-to-the-touch design with powder-coated aluminium casingIndicator lamps for "power on" and "heat on" operationScope of supply: Heating mantle, three sets of integrated support rod clamps, power cords with UK and EU plugs

For power control of heating mantles of the HM series, electric Bunsen burners and heating tapes. Each controller has two neon indicators: White neon "Power On" and amber neon "Mantle/Bunsen Heater On". When the control knob is turned clockwise, the power increases and the amber indicator light begins to pulse. As soon as the maximum power is reached, the lamp lights up continuously. There is a clamp on the rear of the controller for attaching a rod (Ø 12 mm).

Insulating mantles for single and double neck round bottom flasks. To prevent heat losses occuring at the upper flask halves.Made by hand workAluminium coated outer jacketThermally insulated

LabHEAT®-sensors. Suitable for temperature controller KM-RX1001 with permanently attached cable, with diode plug.KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mmKM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 400 mmKM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mmKM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mm

Insulating mantles for single and double neck round bottom flasks, heated insulating mantles with glass yarn element (max. 450 °C) and grounding.Made by hand workAluminium coated outer jacketThermally insulatedTo prevent heat losses occuring at the upper flask halves

LabHEAT®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, plastic housing with fixed support clamp, switching power max. 2300 W (10 A), 1.5 m power supply (earthed) cable with plug. Sensor/alarm connection: Thermo Socket/Clamps.

LabHEAT®-regulator for heating mantles. Electromechanical; infinitely variable control over power outlet; plastic housing; 1.5 m power supply (earthed) cable with plug.

Silicone insulated heating tape up to 200 °C.WaterproofVery flexibleEasy to cleanSuitable for food productionWithout protective conductor

Silicone insulated heating tape up to 200 °C.WaterproofVery flexibleWith metal overbraiding (copper) for good heat transferMetal overbraiding is mechanically and electrically protective (grounded)

With corrosion-resistant stainless steel heating bowl to protect against leaking liquid resulting of a broken flask.Increased working safety in the labPlastic-coated, chemically resistant metal housingPredrilled threaded hole on rear allows to fix the stativ clamp2 heating zonesWith built-in controller allows a continuous adjustment of power outletThermally insulated and earthedWith built-in heating zone switch and residual current detection (RCD)

LabHEAT®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, plastic housing with fixed support clamp, switching power max. 2300 W (10 A), 1.5 m power supply (earthed) cable with plug. Sensor/alarm connection: Socket/Socket.

LabHEAT®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60 mm bottom out-let from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).

LabHEAT®-Heating cover for reaction vessels. Flexible glass yarn heating element, outer jacket in glass silk, with Ø 60 mm bottom outlet from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone and RCD (residual current detection.

LabHEAT®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).

LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).

LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).

LabHEAT®-Heating mantles for flasks, round bottom. Designed and technically identical to series KM-ME, but can be used for round flasks of three different sizes, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection), equipped with a controller which allows a continuous adjustment of power.

LabHEAT® - Heating mantles for flasks, round bottom. Designed and technical identical to series KM-ME, but in addition equipped with a magnetic stirrer; rotational frequency up to 1600 rpm max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable and RCD (residual current detection).

LabHEAT® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).

LabHEAT® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection)..

LabHEAT® - Accessories made of stainless steel (1.4301) for higher stability or to integrate within support wall. The heating mantles are able to be suspended on its four clips.

LabHEAT®-Accessories for metal-cased heating mantles and serial heating unit to fix support rods up to diameter 12 mm or to integrate the metal-cased heating mantles within support wall.

LabHEAT®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, plastic housing with fixed support clamp, switching power max. 2300 W (10 A), 1.5 m power supply (earthed) cable with plug. Sensor/alarm connection: Clamps/Clamps.

LabHEAT®-sensors. Suitable for temperature controller KM-RX1004 with permanently attached cable, without diode plug.KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mmKM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 400 mmKM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mmKM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mm

Not moisture-resistant. With fibre glass protective braiding. Max. surface temperature 450 °C. With nickel-plated copper external braiding as protective earth conductor, 1.0 metre long mains connection cable for permanent connection to a fused outlet. Power loading approximately 200 W/m.

LabHEAT®-Heating tapes. Very flexible. No protection against ingress of water. With inner metal protective braiding and glass fibre insulation. With power cable (1.0 m) for fixed connection.

LabHEAT®-Heating cables. No protection against ingress of water; glass fibre insulation without protective braiding; outer diameters from 3.5 to 4.5 mm; min. bending radius > 5 mm; max. heating element temperature 450 °C; preterminated with 2 x 1.5 m cold end.

Polypropylene outer case is resilient and chemically resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. The flexible heating element is suspended in a thermal insulating cartridge to provide maximum heat transfer with minimum risk of flask breakage. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.

Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom). Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.

Solid stainless steel liner, which protects against fluid spills and is easy to clean, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom). Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to an element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.

Built-in adjustable heater control up to an element temperature of 450 °C and magnetic stirring control up to approx. 520 rpm with auto-reverse facility and automatic stirrer bar trap; the stirrer unit has an independent power supply. Polypropylene outer case is resilient and chemically-resistant. Even at full power output, the exterior remains ''cool-to-touch'' due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.

Alternating current resistance controller with interference suppressor for variable, no-power-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc., control range 25V to 225V. With single throw on/off potentiometer and shielded fuse holder for safe fuse replacement away from the internal circuit. Fitted with interference suppressor in accordance with EN standard.