Ball valves with GL screwthread made of chemically resistant PTFE. Maximum permissible atmospheric temperature 150°C, passing media can be as hot as 220°C.The special construction allows the clamps to be used under pressures of up to 10 bar and also under vacuum. A further advantage is that they can be used as expansion/reduction adapters to connect tubing of different diameters. For easy tubing connection we recommend the accessory Bola laboratory screwthread connection which can be ordered separately.
Stopcocks with cylindrical taps and GL screwthread made of pure PTFE, giving almost total chemical resistance. Can be used at working pressures of up to 6 bar when used in combination with Bola laboratory screwthread connections (at room temperature).A further advantage is that they can be used as expansion/reduction adapters to connect tubing of different diameters. For easy tubing connection we recommend accessory Bola laboratory screwthread connectors - please order separately.
Resistant to compression max. 1 bar.PVDF: excellent chemical resistance, transparent, suitable for foodPP/PE: for industrial use, red/whiteOperating temperature: PVDF 0 to 40 °C, PP/PE 5 to 40 °C
The PTFE valves are used in chemical plants, dosing systems, and analytical instruments where aggressive substances must be safely and reliably handled. Thanks to their high material purity and low particle content, they also perform well in clean rooms, semiconductor production and the pharmaceutical industry.Vacuum and pressure resistanceGood chemical resistanceFood safeAutoclavable
Ball valves with GL screwthread made of chemically resistant PTFE. Maximum permissible atmospheric temperature 150°C, passing media can be as hot as 220°C.The special construction allows the clamps to be used under pressures of up to 10 bar and also under vacuum. A further advantage is that they can be used as expansion/reduction adapters to connect tubing of different diameters. For easy tubing connection we recommend the accessory Bola laboratory screwthread connection which can be ordered separately.
Stopcocks with cylindrical taps and GL screwthread made of pure PTFE, giving almost total chemical resistance. Can be used at working pressures of up to 6 bar when used in combination with Bola laboratory screwthread connections (at room temperature).A further advantage is that they can be used as expansion/reduction adapters to connect tubing of different diameters. For easy tubing connection we recommend accessory Bola laboratory screwthread connectors - please order separately.
Resistant to compression max. 1 bar.PVDF: excellent chemical resistance, transparent, suitable for foodPP/PE: for industrial use, red/whiteOperating temperature: PVDF 0 to 40 °C, PP/PE 5 to 40 °C
The PTFE valves are used in chemical plants, dosing systems, and analytical instruments where aggressive substances must be safely and reliably handled. Thanks to their high material purity and low particle content, they also perform well in clean rooms, semiconductor production and the pharmaceutical industry.Vacuum and pressure resistanceGood chemical resistanceFood safeAutoclavable
Stainless steel dolly for 10 or 20 litre bottlesShock absorbing bottle base protector made of siliconeHandles made of stainless steel
Power controller LR1 for continuous energy regulation between 0 to 100 %. Stand mounting device for fitting the Power Cube onto a retort stand. Stainless steel retort rod for attachment directly to the back of the casing, length approx. 13cm.
Conical shouldersWith NS pennyhead stopper and interchangeable glass capGlass type I / neutral glass as per USP, EP and JPAutoclavable
Conical shouldersWith NS pennyhead stopper and interchangeable glass capGlass type I / neutral glass as per USP, EP and JPAutoclavable
Microcentrifuge tube racks can be equipped with adapters (PP) for 0.5 ml reaction tubes. With light finger pressure on the insert, it snaps in permanently.
9.726 000: Adapter plug with earthing contact from plug with earthing contact and additional earthing socket to British version 13 A, with fine-wire fuse 3, 5 or 13 A ("non rewireable")9.726 001: One-way plug adapter from plug with additional earthing contact (CEE 7) to plug Swiss version type 12 ("non rewireable")
Colourless.Transparent adhesive tape for label protection. Supplied in rolls as indicated.
White. Manufactured from paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Rolls of 30 m.
Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.
Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.Scope of supply:6 rolls (yellow, blue, green, red, orange, white) of 30 m
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.
Self-adhesive labels for hand lettering or print on printing presses. Mounted true to register on sheets with gripper and feeder margin. Each pack contains 2 extra sheets for setting-up operations. Format of the sheets 168 x 120 mm. Length varies in accordance with label size. The sheet sizes and register, however, are absolutely identical for each type. Not suitable for PC printers.Made of wood-free paper (75g/qm)Chlorine-free bleached, FSC-certifiedSolvent-free adhesive
