Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12602.

Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard

Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.

Separating funnel with PTFE stopcock.DIN ISO 4800With standard ground joint and stopper

Separating funnel acc. to Squibb with PTFE stopcock.DIN ISO 4800With standard ground joint and stopperWhite graduation

Acc. to DIN 12420 (xylol method), capacity: 10:0,1ml, with round bottom flask 500ml, measuring tube and condenser made of DURAN® - tubing, flask: DURAN®.

With NS-socket and interchangeable PE stopper, stopcock and key with retaining device. Ungraduated.Two types available:With solid glass keyWith PTFE key

For condensing vapours, with NS cone, water connection: glass olives, made of DURAN® tubing.

Made of DURAN® tubing. For condensing vapours. With cone, water connection with glass olives.

Made of DURAN® tubing. For condensing vapours. With cone, water connection with GL 14 thread and two threaded plastic olives.

Made of DURAN® tubing. Distribution tubes with frit (porosity: 0), for specific heavy solvents.

Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard

Volume graduations and inscriptions are printed with white enamelThick wall and reinforced rimInterchangeable PTFE stopcockAccording to DIN 12242ISO 4800

Manufactured from borosilicate glass 3.3 with glass side arm. The side arms accept tubings with 8/9 mm bore size.

Manufactured from borosilicate glass 3.3 with glass side arm. The side arms accept tubings with 8/9 mm bore size.

Distribution tubes with frit (porosity: 0), for specific light solvents, made of DURAN® tubing.

Extractor heads for the extraction of liquids with specific light solvents, with insert filter (porosity: 0), made of DURAN® tubing.

Made of DURAN® tubing. For the extraction of liquids with specific heavy solvents, with insert filter (porosity: 0).

Soxhlet extraction stillheads, made of DURAN® tubing. Extractor heads acc. to DIN 12602 and in addition to DIN standard.

Made of DURAN® tubing. For extractors and for condensing vapours. With cone. Water connection with thread GL14, with two threaded PP olives.

Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with solid glass plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer

Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with PTFE plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer

With NS socket and PE stopper, with solid glass plug, with screwthread retaining device, available with or without scale (approx. volume / ml), material: borosilicate glass 3.3

With PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .

With polypropylene screw cap and TFE stopcock. Transparent. Resistant to chemicals. 65 mm handle length under the tap. Autoclavable except for easily removable stopcock.

For holding conical separating funnels up to 1000ml. Simple assembly by screw-compression grip. Fits support rods with an outside dia. of 8 to 14mm. Cannot be used with funnels below 75 mm diameter.

With or without scale. With NS socket and PE stopper, with solid glass plug, with screw thread retaining device, with scale (approx. volume / ml).

Conical pattern. With PTFE stopcock and retaining device. Available with or without, scale to read the approximate volume. With PP conical stopper.

Transparent. Teflon® FEP, Tefzel® ETFE stopcock and ETFE screw cap. Impact resistant. Non-wetting surfaces ensure no liqiud residue adhesion. Chemically stable. Length of stem under stopcock 65mm. Autoclavable.Teflon® and Tefzel® are registered trademark of DuPont.