Soft and gentle, yet strong. White, embossed, sterilisable. Individual cloths.
HMT 230/260 FA - for standard tasks:Certified according to regulation 93/42/EECAvailable in 2 sizes with a volume of 16 or 24 liters9 sterilization programs, fully automatic: 121 °C wrapped / unwrapped solid items; with or without drying, 135 °C wrapped / unwrapped solid items; with or without drying, Liquid program: 121 °C, 40 min.Controlled by a microprocessorSimple digital displayWater tankElectromechanical overheating protectionSafety valveMechanical pressure-dependent door lockReset/emergency buttonEasy maintenanceHMT 230/260/300 MA - versatile table-top autoclave:Certified according to regulation 93/42/EECAvailable in 3 sizes with a volume of 16, 24 or 40 litersPowerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components7 sterilization programs, fully automatic: 121 °C wrapped / unwrapped (vacuum), 134 °C wrapped / unwrapped (vacuum), Liquid and prion programs, Bowie-Dick testControlled by a microprocessorProgress indicatorInternal water tankElectromechanical overheating protectionElectronic overpressure protectionPressure safety valveMechanical pressure-dependent door lockReset/emergency buttonEasy maintenanceHMT 260/300 MB - premium table-top autoclave:Certified according to regulation 93/42/EECAvailable in 2 sizes with a volume of 24 or 40 litersPowerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components5 sterilization programs, fully automatic: Sterilization of wrapped items: 121 °C - 30 min.; 134 °C - 15 min., Sterilization of unwrapped items: 121 °C - 15 min.; 134 °C - 4 min., Individual temperature selection from 105° to 135 °C, Preset prion program3 test programs: leakage test, helix test, Bowie-Dick testControlled by a microprocessorEasy operation with a LCD displayDocumentation / data storage via SD card and printerDrying program, 1- 60 minutes4 literwater tank, to be filled manually or automatically (purified water)Various safety features, e.g. safety valve or pressure-dependent door lockWith modern design, easy maintenance
These Bowie-Dick Test Packs are pre-assembled, single use test packs designed to evaluate the performance of the air removal system of pre-vacuum assisted sterilisers in compliance with EN 285 and operating at 134 °C and 3.5 minutes. An indicator sheet printed with water based, non-toxic chemical indicator is placed in the center of each pack. The uniform colour change of the indicator after steam sterilisation indicates that all air was removed and replaced by steam. The backside of the indicator sheet contains fields to be filled out and it can be kept as a permanent record for traceability purposes.Disposable, pre-assembled and ready to use test packsDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Clean and accurate indicator color changeIndicator sheet can be kept as a permanent recordValidated for 4 kg and 7 kg sterilisation loadManufactured in absence of lead or other heavy metals
For round and Erlenmeyer flasks from 500ml to 5000ml with NS 29 or wider neck . Comprises replaceable, flexible head with short, stiff bristles on a long wooden handle. Total length approx. 420mm.
The dispenser frame is made of stainless steel and steel rods with nylone bearings for hygienic use at CSSDs. The integrated cutting unit includes an accurate and high quality cutting blade, providing safe and secure handling, as well as easy replacement. The roll dispenser and cutter is an useful addition to rotary sealing machines. It's renewed and the modular design makes it an ergonomic and economic tool which can be used as single or double rack model on working stations or just mounted on the wall.
This Rotary Sealer is an entry model which is solid, durable and extremely easy to use. Once power is on and the variable temperature adjustment has been done, the Rotary Sealer works when it's needed and stops automatically when the work is done. The basic rotary sealer is microprocessor controlled and the temperature can be adjusted anytime easily. The sensitive temperature ranging between50 °C and 250 °C provides the user with flexibility to seal different kinds of packaging such as paper/film and Tyvek® pouches. Automatic feeding driven by optical sensors and multiline sealing technique ensure optimum seal strength at continuous operations. This sealing system is validated, calibrated and in compliance with international standards.
Self-seal sterilization pouches are pre-folded and assure accurate and fast closing without the requirement of a heat sealing device. They are especially suited for use in small general practices, dental surgeries and by users who want to avoid costs of additional sealing equipment. The self-seal sterilization pouches are constructed from transparent PET/PP multi-layer copolymer film, medical grade paper and adhesive strip which provides excellent resistance to over-exposure of steam and clean opening. Water based, non-toxic process indicators for steam and ethyleneoxide sterilization complying with ISO 11140-1 are applied on the paper surface and help to differentiate between processed and unprocessed packages.Reinforced film to avoid tearing during openingClean and accurate indicator color changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrity
Class 4 Multi-Variable Steam Indicator StripsClass 4 Multi-Variable Steam indicator strips are designed to be used in steam sterilizers operating at 134 °C -3.5 minutes. The indicator strips can be used in every pack and will provide assurance of steam penetration into the packs.The water based and non-toxic chemical indicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to black after successful steam sterilization. PMSSteriTest indicator strips are cost effective and can be divided into two separate pieces for more economical use.Dual Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to blackManufactured in absence of lead or other heavy metalsClass 6 Emulating Steam Indicator StripsClass 6 Emulating Steam indicator strips are designed to be used in steam sterilizers operating at 121 °C -15 minutes and 134 °C -3.5 minutes. The cycle verification indicators can be used in every pack and will provide assurance of steam penetration into the packs and presence of all critical parameters of steam sterilization cycle. The water based and non-toxic chemicalindicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to lilac after successful steam sterilization.Single Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Designed for STEAM sterilization at 121 °C - 15 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to lilacManufactured in absence of lead or other heavy metals
Certified according to the Pressure Equipment Directive 2014/68/EUAvailable in 2 sizes with 50 and 80 liters of effective usable volumeInnovative locking system with motorized lid including pressure and temperature monitoringSteam generation in the chamberHigh energy efficiency and long service lifeRapid cooling for short cooling timesAlso available with flexible temperature sensor for the sterilization of liquidsTimer function and 4 program groups with 3 sub-groups each, including night and dissolution program, adjustments for customized programs are always possibleNo water/waste-water installation requiredCastors for mobile useEasy to clean plastic surface with rounded edges in contact areas (no burns or injuries).Electrical, mechanical and constructional factors guarantee the highest level of quality and user protectionThe accessories make it possible to configurate the autoclave according to your wishesExhaust air filters for laboratories of safety level S2 and higher are also available
Tireless, durable and ingeniously simpleCertified according to the Pressure Equipment Directive 2014/68/EUAvailable in 4 sizes with 25, 50, 85 and 110 liters of effective usable volumeSimple, reliable and with a long service life, your perfect choice for standard tasksOptionally available with flexible temperature sensor for the sterilization of liquidsFor all devices up to 110 liters only a single-phase power supply (220/240 V; 50/60 Hz) is requiredTimer function and 3 program groups with a max. of 6 programs including dissolution program, adaptions for customized programs are always possibleNo installation to a feed water supply requiredCastors for mobile useEasy to clean plastic surface with rounded edges in contact areas (no burns or injuries)Electrical, mechanical and constructional factors guarantee the highest level of quality and user protectionThe accessories make it possible to configurate the autoclave according to your wishesExhaust air filters for laboratories of safety level S2 and higher are optionally available
Heat-sealable sterilisation reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation reels are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat sealable sterilisation rolls
Laboratory table-top autoclave with round chamber for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchEquipment versionsBasic Lab: With heating elements. For the sterilization of simple materials or liquids without removal dry.Dry Lab: With heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.Quick Lab Basic: With heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.Quick Lab: With heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.Quick Lab Advanced: With steam generator, water ring vacuum pump, water-cooling system, internal heat exchanger, air recirculation valve, steam/air mixture method (SAMM). For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying. This also applies to liquids in closed containers.Safe Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.Complete Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF, water-cooling system, internal heat exchanger. Fully equipped laboratory autoclave for operation in the level S2 lab. Recommended for the sterilization of infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.SpecificationsChamber volume:65 lPermissible operating pressure:3.8 bar absolutePermissible operating temperature:140 °CHeat output:6.0 kWChamber dimensions (W x D x H):310 x 680 x 310 mmOuter dimensions (W x D x H):700 x 820 x 644 mmWeight basic unit:125 kgPower supply:400 V, 50 Hz, 16 A
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith heating elements. For the sterilization of simple materials or liquids without removal dry.
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith steam generator, water ring vacuum pump, water-cooling system, internal heat exchanger, air recirculation valve, steam/air mixture method (SAMM). For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying. This also applies to liquids in closed containers.
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.
Laboratory table-top autoclave for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchWith heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.