The water provides optimal operating comfort by splash-proof keypad and bright strong multi-display (LED). Modern microprocessor technology with PID temperature control ensures optimum temperature stability in the water bath. The circulation pump is used to improve the temperature distribution. The adjustable overheating protection protects the samples. Bath tanks and all parts in contact with the bath liquid are made of high quality stainless steel.Only suitable for milk butyrometer.
For simultaneous injection of coagulant or reagents in six sample beakers.
Pressureless plastic cartridges made of blue polyethylene filled with quality mixed-bed resins incl. analogue conductivity meter, hose connection and wall bracket. Ideal for treating small quantities of water for laboratories, medical and dental practices, etc.Convenient pure water production directly at the workplaceExtremely easy handling and maximum efficiencyNo algae build-up in the blue light protection cartridgePure water quality: 0.1 to 10 µS/cm
e.g. for the Coupled Units Test in acc. with OECD 303 A, complete.optional:Dentrification step with pump and stirrersOxygen control, consisting of:Oxygen measuring unit for preliminary sedimentation with a voltage output for switching the air supply on and off behrotest® GWS 200 limit switch. Operating capacity 0 to 200%, corresponds to 0 to 19.9 mg/l Vessels made of borosilicate glass 3.3Other laboratory purification plants on request.
Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU.Automatic overall range adjustment with standard set T-CalHigh accuracySuitable for laboratory and mobile useMemory storage of up to 1000 data-setsReal-time clockWaterproof sample chamber and housingScope of supply: Turbidimeter TB 300 IR in carrying case, 1 set of turbidity standards T-Cal, 7 rechargeble batteries (AA), 1 lithium battery, main charger 100-240V, PC connection cable, 4 vials (diam. 24 mm) with lids, instruction manualSpecificationsLight source:IR-LED (860nm)Keypad:acid and solvent resistant, membrane switch keypadAuto - Off:automatic switch off approx. 20 min after last key pressDisplay:Graphic-displayUpdate:Software update via internetMemory:1000 data sets with date, time and registration no.Measuring range:0.01 to 1100NTU (Auto range)Resolution:0.01NTU (0.01 to 9.99NTU) 0.1NTU (10 to 99.9NTU) 1NTU (100 to 1000NTU)Accuracy:± 2% of measured value or 0.01 (0 to 500NTU)/± 5% of measured value (500 to 1100NTU)Ambient conditions:0 to 40°C at 30 to 90% R.H. (non condensing)Interface:RS232Power supply:7 NiMH rechargeable batteries (AA/Mignon), wall plug mains adapter and Lithium battery for data storage and real time clock
Analyser with printer, for the rapid and accurate determination of Fat and SNFDensity, protein, lactose and freezing point are calculatedFat:0.00 ... 40.00 %SNF:0.00 ... 15.00 %
Benchtop devices suitable for mobile use. For precise water control through high-precision optics and high-quality interference filters with long-term stable LEDs as light sources.Automatic shutdownReal time clock and dateAdjustment function displayIlluminated LCD-displayFurther photometer versions available on request.SpecificationsMeasurement cycle:approx. 3 seconds (method dependent)Optics:Temperature compensated LED and photosensor intensifier in a waterproof sample chamberKeyboard:4-key polycarbonate film, splashproofDimensions (W x D x H):110 x 190 x 55 mmWeight:455 gPower supply:4 x AAIP code:IP 68pH:6.5 - 8.4
Portable gas monitors to detect gases in the surrounding atmosphere. They measure concentrations of toxic gases and oxygen in the atmosphere and issue an alarm when gas concentrations reach preset levels. The alarms are indicated by flashing lamp, intermittent audible buzzer, flashing gas concentration readout and vibration.LCD displayR-sensor and CO-sensor with H2-reductionRobust constructionWater- and dust-proofBattery or rechargeable battery operationSpecificationsGas alarm:STEL Alarm, TWA Alarm, OverAlarm volume:80 dbHumidity:0 ... 95 % RH (OX-04G: 10 ... 90 % RH)Detection principle:Electrochemical type (OX-04G: galvanic cell type)Dimensions (W x D x H):54 x 24 x 67 mmWeight:93 gPower supply:2 x AAA alkaline batteries, or 2 x AAA rechargeble batteries (Ni-MH)Protection class:IP 66/67Warranty (sensor):3 years (OX-04G: 1 year)