Passa al contenuto principale Salta alla ricerca Passa alla navigazione principale

Magnetic stirrer with heating RCT basic anodized

Filtro

Info sui prodotti "Magnetic stirrer with heating RCT basic anodized"

The RCT basic sets a new industry standard. This exceptionally compact magnetic stirrer combines uncompromising safety, outstanding robustness and maximum efficiency with intuitive and extremely simple operation.

  • Can be combined with the ETS-D5 contact thermometer and with wireless temperature sensors PT.Wireless and ETS-D7 (optional USB WD dongle required)

  • Up to two temperature sensors for the medium and the carrier medium can be connected

  • Independent safety circuit according to EN IEC 61010-2-010

  • Detection of sudden temperature drops and failure to reach the set temperature

  • Stirring remains active in the event of a fault

  • Visual warning of hot surfaces (> 50 °C)

  • USB/RS232 interface

  • Networked safety through communication with other IKA devices, e.g. overhead stirrers

  • Safe monitoring in the laboratory with the IKA APP (accessory required)

  • Robust, sealed design ensures resistance to aggressive vapors and liquids

  • Operating modes with access protection

  • Intuitive plain-text LED display

  • Customisable display

  • Two mounting points for support rods

  • Made in Germany: Manufactured in a fully automated production facility using state-of-the-art robotic Systems

The high-quality anodised coating provides reliable protection against scratches and a wide range of chemicals.

Scope of supply: Magnetic stirrer, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), screwdriver

Alimentazione: 220 ... 230 V, 50/60 Hz
Altezza: 100 mm
Capacità max. di agitazione: 20 l
Classe di protezione (IP): IP 54
Codice articolo del produttore: 0020137147
Con collegamento al sensore esterno di temperatura: Sì
Con timer: Sì
Dimensioni (LxPxH): 160 x 200 x 100 mm
Display: digitale
Frequenza: 50/60 Hz
Garanzia: 10 anni
Larghezza: 160 mm
Materiale dell‘alloggiamento: Alluminio pressofuso
Materiale superficie di agitazione: Aluminium, anodised
Max. temperatura di sicurezza: 360 °C
Max. tensione: 230 V
Numero di punti di agitazione: 1
Peso: 2.3 kg
Potenza nominale: 820 W
Potenza riscaldante: 800 W
Precisione di controllo della temperatura di riscaldamento: ±5 K
Profondità: 200 mm
Temperatura ambiente consentita: 5 ... 40 °C
Temperatura ambiente massima consentita: 40 °C
Temperatura ambiente minima consentita: 5 °C
Temperatura di riscaldamento: RT ... 310 °C
Temperatura di sicurezza: 50 ... 360 °C
Temperatura max. di riscaldamento: 310 °C
Temperatura minima di sicurezza: 50 °C
Tensione minima: 220 V
Tipo: RCT basic anodized
Tipo di energia ausiliaria: Collegamento alla rete elettrica
Tipo di spina: CH
UNSPSC: 41103806
Umidità relativa massima: 80 %
Velocità: 50 ... 1.500 1/min
Velocità max.: 1500 1/min
Velocità max. di riscaldamento: 9 K/min
Velocità minima: 50 1/min
Ø area di lavoro: 135 mm
Salta la galleria dei prodotti

Accessories

Electronic Contact thermometer ETS-D5
Electronic Contact thermometer ETS-D5

The ETS-D5 electronic contact thermometer redefines precision, safety and ease of use. Developed for demanding laboratory processes, it offers everything needed for reliable temperature control.Optimised PID control for stable temperature control without overshootAutomatic shutdown of the magnetic stirrer in case of a sensor fault or exceeding defined safety temperatureSensor timeout detects when the sensor is not in the mediumTemperature drop detection reacts to unexpected temperature dropsSetpoint monitoring (Delta T) and setpoint limitationSafe-Temp switches off the temperature control if the value is exceededThree temperature control modes (Fast, Precise, Synthesis block optimised)Adjustable heating rate in percent for sensitive samplesUser-friendly touchscreen for intuitive operationReplaceable temperature probeUSB-C interface

Temperature/pH sensor PT Wireless
Temperature/pH sensor PT Wireless

The PT Wireless measures temperature and pH values and transmits them wirelessly or, alternatively, via USB-C to IKA magnetic stirrers or overhead stirrers, as well as to the laboratory software Labworldsoft®.Integrated BNC interface for direct connection of a pH electrodeMeasurement values can be displayed in real time directly via the appTemperature and pH values can be calibrated directly via the appReplaceable temperature probesBattery life of up to 150 hoursMulti-level battery status warning

USB dongle USB WD
USB dongle USB WD

The USB WD dongle adds wireless communication capabilities to the RCT basic, creating the basis for modern, connected laboratory applications. It is compatible with the IKA sensors PT wireless and ETS D7, as well as the IKA app. This allows temperature and pH values to be captured wirelessly, displayed in real time and documented digitally in combination with Labworldsoft®. Wireless device-to-device communication is also supported.

Electronic Contact thermometer ETS-D7
Electronic Contact thermometer ETS-D7

The intelligent, wireless ETS-D7 temperature probe combines precise measurement, maximum flexibility and true independence, as a pH electrode can be connected directly via the integrated BNC interface.Temperature and pH measuring without addtional measuring devicesWireless transmission of measured values or, alternatively, via USB-C to compatible IKA devicesThe high-resolution touchscreen detects when a user wants to read a measured value and activates only when needed, or can be left switched on permanentlyThe display has a resolution of two decimal places for temperature and pH valuesSynchronisation of set values thanks to bidirectional communicationCompatibility with labworldsoft® enables central acquisition, control, visualisation and documentation of measurement dataReplaceable temperature probe

Salta la galleria dei prodotti

Set

Magnetic stirrer with heating RCT basic Synthesis Solution 250, set

The RCT basic Synthesis Solution magnetic stirrer offers a complete system solution for safe synthesis operations, including all the necessary components, which perfectly match. It combines the trusted IKA synthesis blocks with modern wireless temperature and pH measurement, as well as enhanced process reliability.With a solid aluminium synthesis block for safe handlingDual temperature monitoring via the supplied PT Wireless temperature sensor and PT 1000.60 temperature probeSimultaneous display of temperature values on the screen or, alternatively, via the optional USB stick in the IKA apppH measurement is carried out by connecting a pH electrode to the PT Wireless temperature sensor (BNC connection)Optional mounting of a reflux condenser via the second stand mount on the RCT basicWith synthesis block for 250 ml flasks.Scope of supply: Magnetic stirrer, temperature sensor PT Wireless, temperature probe PT 1000.60, flask carrier H 135.25 (250 ml), support rod H 16 V, holding rod H 38, 2 x boss head clamp H 44, universal clamp R 350, USB dongle USB WD, protective cover H 80, 5 x magnetic stirring bars IKAFLON® 25 ellipse, screwdriver

Magnetic stirrer with heating RCT classic
Magnetic stirrer with heating RCT classic

The RCT classic magnetic stirrer stands for reliability, exceptionally long service lifetimes and the highest safety standards. In accordance with the DIN EN 61010-2-010 standard, it meets all safety requirements for laboratory equipment for heating substances and is therefore also suitable for unattended operation.Connection option for an external temperature probe and an electronic contact thermometer (DIN socket 12878), e.g. ETS-D5Two optimised temperature control modes ensure fast heating or precise temperature control without overshootingTempered shatterproof glass surface for optimal chemical resistance and easy cleaningLargest display in its class with an easy-to-read LED displayIlluminated symbols for displaying important status information (setpoint and actual temperature, heating status, temperature sensor)Push and turn buttons for independent adjustment of setpoints and starting/stopping of temperature and speedAutomatic switch-off of the tempering function in case of an errorVisual warning of hot surface (>50°C)USB-B interfaceSoft start prevents magnetic stir bars from breaking off during the start phaseScope of supply: Magnetic stirrer, PT 1000.60 temperature probe, H 80 protective cover, IKAFLON® 30 and IKAFLON® 40 magnetic stirring bars, screwdriver

Magnetic stirrer with heating RCT basic Synthesis Solution 500, set

The RCT basic Synthesis Solution magnetic stirrer offers a complete system solution for safe synthesis operations, including all the necessary components, which perfectly match. It combines the trusted IKA synthesis blocks with modern wireless temperature and pH measurement, as well as enhanced process reliability.With a solid aluminium synthesis block for safe handlingDual temperature monitoring via the supplied PT Wireless temperature sensor and PT 1000.60 temperature probeSimultaneous display of temperature values on the screen or, alternatively, via the optional USB stick in the IKA apppH measurement is carried out by connecting a pH electrode to the PT Wireless temperature sensor (BNC connection)Optional mounting of a reflux condenser via the second stand mount on the RCT basicWith synthesis block for 500 ml flasks.Scope of supply: Magnetic stirrer, temperature sensor PT Wireless, temperature probe PT 1000.60, flask carrier H 135.30 (500 ml), support rod H 16 V, holding rod H 38, 2 x boss head clamp H 44, universal clamp R 350, USB dongle USB WD, protective cover H 80, 5 x magnetic stirring bars IKAFLON® 25 ellipse, screwdriver

Magnetic stirrer with heating RCT basic ETS-D7 Solution, set
Magnetic stirrer with heating RCT basic ETS-D7 Solution, set

The RCT basic ETS-D7 Solution expands the trusted RCT basic with additional features for wireless temperature and pH measurement. The system combines precise measurement technology with enhanced security and maximum flexibility in everyday laboratory work. Complete solution including mounting hardware.The USB WD dongle enables wireless transmission of measurement dataA pH electrode can be connected to the ETS-D7 via a BNC socket as an optionIf required, the ETS-D7 can also be used without the RCT basic as a standalone pH meter or temperature measuring deviceWith the PT 1000.60 temperature sensor, two temperatures can be measured simultaneously: Monitoring and limiting the temperature of a heat transfer medium and temperature control directly within the mediumScope of supply: Magnetic stirrer, contact thermometer ETS-D7, temperature probe PT 1000.60, USB dongle USB WD, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Magnetic stirrer with heating RCT basic anodized ready-to-go Solution, set
Magnetic stirrer with heating RCT basic anodized ready-to-go Solution, set

The RCT basic ready-to-go system solution includes all the components required for precise temperature control of samples using the RCT basic magnetic stirrer.Complete stand for the precise and secure positioning of the supplied PT 1000 temperature sensorMultifunctional silicone cover for splash protection, noise reduction and reduced energy consumptionThe high-quality anodised coating provides reliable protection against scratches and a wide range of chemicals.Scope of supply: Magnetic stirrer, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), beaker lid BC 1000, support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Magnetic stirrer with heating RCT basic anodized ETS-D5 Solution, set
Magnetic stirrer with heating RCT basic anodized ETS-D5 Solution, set

This system solution, combining the RCT basic magnetic stirrer and theETS-D5 electronic contact thermometer, makes experiments and reactionseven safer.Comprehensive monitoring of permissible temperatures with corresponding safety shut-off in the event of errorsStirring function remains active to prevent delayed boilingImproved resolution and setting accuracySimultaneous display of set and actual medium temperatureErgonomic reading of values at eye levelAdditional display of the current hotplate temperature on the RCT basicThe high-quality anodized coating provides reliable protection against scratches and a wide range of chemicals.Scope of supply: Magnetic stirrer, contact thermometer ETS-D5, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40) support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Magnetic stirrer with heating RCT basic Synthesis Solution 1000, set

The RCT basic Synthesis Solution magnetic stirrer offers a complete system solution for safe synthesis operations, including all the necessary components, which perfectly match. It combines the trusted IKA synthesis blocks with modern wireless temperature and pH measurement, as well as enhanced process reliability.With a solid aluminium synthesis block for safe handlingDual temperature monitoring via the supplied PT Wireless temperature sensor and PT 1000.60 temperature probeSimultaneous display of temperature values on the screen or, alternatively, via the optional USB stick in the IKA apppH measurement is carried out by connecting a pH electrode to the PT Wireless temperature sensor (BNC connection)Optional mounting of a reflux condenser via the second stand mount on the RCT basicWith synthesis block for 1000 ml flasks.Scope of supply: Magnetic stirrer, temperature sensor PT Wireless, temperature probe PT 1000.60, flask carrier H 135.40 (1000 ml), support rod H 16 V, holding rod H 38, 2 x boss head clamp H 44, universal clamp R 350, USB dongle USB WD, protective cover H 80, 5 x magnetic stirring bars IKAFLON® 25 ellipse, screwdriver

Magnetic stirrer with heating RCT basic ETS-D5 Solution, set
Magnetic stirrer with heating RCT basic ETS-D5 Solution, set

This system solution, combining the RCT basic magnetic stirrer and theETS-D5 electronic contact thermometer, makes experiments and reactionseven safer.Comprehensive monitoring of permissible temperatures with corresponding safety shut-off in the event of errorsStirring function remains active to prevent delayed boilingImproved resolution and setting accuracySimultaneous display of set and actual medium temperatureErgonomic reading of values at eye levelAdditional display of the current hotplate temperature on the RCT basicWith aluminium hotplate.Scope of supply: Magnetic stirrer, contact thermometer ETS-D5, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Magnetic stirrer with heating RCT basic PT Wireless Solution, set
Magnetic stirrer with heating RCT basic PT Wireless Solution, set

The RCT basic PT Wireless Solution expands the trusted RCT basic with additional features for wireless temperature and pH measurement. The system combines precise measurement technology with enhanced safety and maximum flexibility in everyday laboratory work.Wireless data transfer via the included USB WD USB stickDual temperature monitoring via the supplied PT Wireless temperature sensor and PT 1000.60 temperature probepH measurement is carried out by connecting a pH electrode to the PT Wireless temperature sensor (BNC connection)Scope of supply: Magnetic stirrer, temperature sensor PT Wireless, temperature probe PT 1000.60, USB dongle USB WD, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Magnetic stirrer with heating RCT basic ready-to-go Solution, set
Magnetic stirrer with heating RCT basic ready-to-go Solution, set

The RCT basic ready-to-go system solution includes all the components required for precise temperature control of samples using the RCT basic magnetic stirrer.Complete stand for the precise and secure positioning of the supplied PT 1000 temperature sensorMultifunctional silicone cover for splash protection, noise reduction and reduced energy consumptionWith aluminium hotplate.Scope of supply: Magnetic stirrer, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), beaker lid BC 1000, support rod H 16 V, boss head clamp H 44, holding rod H 38, screwdriver

Salta la galleria dei prodotti

Other customers also bought

Magnetic stirrer with heating RCT classic
Magnetic stirrer with heating RCT classic

The RCT classic magnetic stirrer stands for reliability, exceptionally long service lifetimes and the highest safety standards. In accordance with the DIN EN 61010-2-010 standard, it meets all safety requirements for laboratory equipment for heating substances and is therefore also suitable for unattended operation.Connection option for an external temperature probe and an electronic contact thermometer (DIN socket 12878), e.g. ETS-D5Two optimised temperature control modes ensure fast heating or precise temperature control without overshootingTempered shatterproof glass surface for optimal chemical resistance and easy cleaningLargest display in its class with an easy-to-read LED displayIlluminated symbols for displaying important status information (setpoint and actual temperature, heating status, temperature sensor)Push and turn buttons for independent adjustment of setpoints and starting/stopping of temperature and speedAutomatic switch-off of the tempering function in case of an errorVisual warning of hot surface (>50°C)USB-B interfaceSoft start prevents magnetic stir bars from breaking off during the start phaseScope of supply: Magnetic stirrer, PT 1000.60 temperature probe, H 80 protective cover, IKAFLON® 30 and IKAFLON® 40 magnetic stirring bars, screwdriver

Magnetic stirrer with heating RET basic
Magnetic stirrer with heating RET basic

The magnetic stirrer RET basic offers a sophisticated, multi-stage safety concept, innovative operation and maximum flexibility. Thanks to its integrated Wi-Fi and LAN interfaces, it is the ideal solution for digitalisation and documentation projects in which devices need to be centrally networked, monitored, controlled or integrated into software systems. Combination with IKA ETS-D5 contact thermometer or IKA PT.Wireless and ETS-D7 wireless temperature sensors possibelDual sensors for medium and carrier mediumIndependent safety circuit in accordance with EN IEC 61010-2-010Monitoring the temperature in the medium with the Delta-T safety functionDetection of sudden temperature drops or failure to increase temperatureStirring remains active in the event of a fault Warning of hot surface (>50°C)Integrated interfaces: RS232, USB-C, LAN, Wi-FiSafe monitoring in the laboratory with the IKA app (accessory required)Freely programmable timerAdjustable operating modes with access protectionCustomisable displayIntuitive plain-text LED displayTwo mounting points for support rods Made in Germany: Manufactured in a fully automated production facility using state-of-the-art robotic SystemsWith aluminium hotplate.Scope of supply: Magnetic stirrer, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), screwdriver

Magnetic stirrer with heating RET basic anodized
Magnetic stirrer with heating RET basic anodized

The magnetic stirrer RET basic offers a sophisticated, multi-stage safety concept, innovative operation and maximum flexibility. Thanks to its integrated Wi-Fi and LAN interfaces, it is the ideal solution for digitalisation and documentation projects in which devices need to be centrally networked, monitored, controlled or integrated into software systems. Combination with IKA ETS-D5 contact thermometer or IKA PT.Wireless and ETS-D7 wireless temperature sensors possibelDual sensors for medium and carrier mediumIndependent safety circuit in accordance with EN IEC 61010-2-010Monitoring the temperature in the medium with the Delta-T safety functionDetection of sudden temperature drops or failure to increase temperatureStirring remains active in the event of a fault Warning of hot surface (>50°C)Integrated interfaces: RS232, USB-C, LAN, Wi-FiSafe monitoring in the laboratory with the IKA app (accessory required)Freely programmable timerAdjustable operating modes with access protectionCustomisable displayIntuitive plain-text LED displayTwo mounting points for support rods Made in Germany: Manufactured in a fully automated production facility using state-of-the-art robotic SystemsThe high-quality anodised coating provides reliable protection against scratches and a wide range of chemicals.Scope of supply: Magnetic stirrer, temperature probe PT 1000.60, protective cover H 80, magnetic stir bars (IKAFLON® 30, IKAFLON® 40), screwdriver