Paraffin repellent spray Parapel™
This spray protects against excessive wax build-up on countertops and instruments.
Neutral buffered formalin (10 %) Richard-Allan Scientific™, ready-to-use solution
Premixed, neutrally buffered formalin for fixation of tissue. Strict quality controls ensures a consistent formaldehyde concentration of 10 %.Reduces exposure to toxic formaldehyde fumesPhosphate buffer stabilises pH between 6.8 and 7.2Stable to freezing temperatures
Fixing solution Bouin fluid Richard-Allan Scientific™
Saturated, aqueous picric acid solution for the fixation of soft and finely structured tissue, as well as biopsies of the gastrointestinal area. Ideally suited for trichrome staining procedures.
Decalcifier Shandon™ TBD-1™
Fast acting hydrochloric acid-based decalcifier. For decalcification of bone marrow biopsies (15 to 30 minutes) and thin bone fragments (3 to 12 hours). Added ingredients protect cells from actions of acids.
Decalcifier Shandon™ TBD-2™
Decalcifier based on formic acid for slow and gentle descaling. Added ingredients protect cells from actions of acids.
Frozen section medium Neg-50
The water-soluble frozen section medium ensures high-quality sections down to -50 °C without chatter. Leaves no residue after staining.
Staining solution Eosin-Y Richard-Allan Scientific™ Signature
Fast-acting, alcoholic counterstain that provides excellent delineation of cytoplasmic components. Various shades of red and pink provide good differentiation between muscles, red blood cells, and connective tissue.Very good colour contrast between cell nuclei and cytoplasmStrict quality assurance guarantees product consistency and longevityQuantitative testing eliminates the need for adjustments in dilution or time
Staining solution Haematoxylin 7211 Richard-Allan Scientific™ Signature
Staining solution with unique composition that gives better results than Gill or Harris Haematoxylins.No affinity for acid mucopolysaccharide (mucin) stainingAchieves clearly stained slides with well-defined nuclear chromatin delineation
Staining solution modified haematoxylin acc. to Harris Richard-Allan Scientific™
The modified Harris haematoxylin is a regressive cell nuclear staining solution for use in histology and cytology.Without mercuryMore stable than conventional Harris haematoxylinFiltering recommended before use
Staining solution modified haematoxylin acc. to Mayer Richard-Allan Scientific™
The modified Mayer's haematoxylin is a progressive cell nucleus staining solution and is suitable as a counterstain for immunoperoxidase and special staining procedures. Overstaining of tissue sections is difficult with this product, yet clear cell nucleus staining is achieved.Acid rinsing not necessaryNo mucin stainingRecommended for staining when less intensity is desired
Staining solution Eosin-Y Shandon™
Eosin-Y is a fast-acting cytoplasmic counterstain. The pH is adjusted for maximum stain uptake and is compatible with all alum haematoxylin staining solutions.Produces brilliant staining and consistent resultsReady-to-use
Dyes for tissue marking Richard-Allan Scientific™ Mark-It™
Permanent dyes that maintain their original brilliance during routine tissue processing cycles. Ideal for identifying tissue margins. Suitable for fresh or formalin-fixed tissue.
Amyloid stain kit Richard-Allan Scientific™
The amyloid stain kit is used to detect amyloid in tissue. Alkaline Congo red solution stains amyloid orange to red and shows apple-green birefringence when examined with a polarising microscope.
Iron stain kit Richard-Allan Scientific™
The iron stain kit is used to detect iron (haemosiderin) in histological or haematological preparations. Optimal for the examination of iron deficiency anaemia, haemochromatosis and haemosiderosis.Staining result: iron is stained blue, cell nuclei are stained pink-red, and the cytoplasm is stained pale pink
Periodic Acid Schiff (PAS) stain kit Richard-Allan Scientific™
The PAS stain kit can be used to detect specific carbohydrates and their distribution in the tissue.Staining result: glycogen, mucin, some basement membranes and fungal walls are stained rose to magenta and cell nuclei are stained blue
Elastic stain kit Richard-Allan Scientific™
The stain kit is based on the Verhoeff's technique for staining elastic fibres. For the diagnosis of atrophy, thinning and loss of elastic tissue, as well as for the detection of breaks, splitting and reduplication of elastic fibres.Staining result: elastic fibres are stained blue-black to black, with red collagen and yellow background
Masson trichrome stain kit Richard-Allan Scientific™
The stain kit facilitates the differentiation of collagen and smooth muscle tissue in tumours and helps to detect connective tissue diseases, as well as changes in muscle tissue.Staining result: cytoplasm, keratin and muscle fibres are stained red, collagen and mucin are stained blue and cell nuclei are stained black
Alcian blue/PAS stain kit Richard-Allan Scientific™
The Alcian blue/PAS stain kit is used for the detection of both neutral and acidic mucosubstances. It can be used alone to stain acid mucins and other carboxylated and sulfated acid mucosubstances on tissue sections blue. Periodic acid Schiff (PAS) reagent stains glycogen, basement membranes, and neutral mucosubstances pink.
Reticulin silver stain kit Richard-Allan Scientific™
The Reticulin silver staining is a modification of the Gordon and Sweet reaction used to identify reticular fibres in tissue sections. The ammoniacal silver working solution selectively impregnates reticular fibres and reacts with them in several reaction steps. Nuclear fast red provides a red background stain.
Mounting medium ClearVue™
Liquid medium for covering tissue sections and other preparations for microscopic analysis and long-term storage.
Mounting medium Shandon-Mount™
Permanent toluene-based mounting medium for conventional coverslipping methods.Dries overnightRefractive index: 1.495 ±0.005 (dry)Viscosity: low (72 to 120 cps at 22 °C)
Mounting medium Shandon™ Immu-Mount™
Non-permanent aqueous-based mounting medium for immunostaining and other techniques.Dries overnightNon-fluorescent medium with low viscosityResists fadingRapid polymerisation facilitates handling of the finished slidesRefractive index: 1.495 ±0.002 (liquid), 1.586 ±0.002 (dry)Viscosity: low (120 to 160 cps at 24 °C)pH value: 8.0 to 8.8 (at 21 to 24 °C)
Histological staining solutions
Stains are delivered in 1000 ml bottles. Each bottle is sufficient for 1500 up to 2500 specimens. They can be used for clinical diagnostics.Harris' hematoxylin solution (Papanicolaou's solution 1a): The cytological staining technique developed by Papanicolaou is still the standard method in cancer and hormone cycle diagnosis. By using the classical Harris' hematoxylin solution (Papanicolaou's solution 1a), excellent nuclear staining can be achieved in 3 to 5 minutes. Nuclei are stained blue, dark violet to black. Densitiy (20 °C): 1.04 g/cm3. pH value (20 °C): 2.3 to 2.8. C.I. 75290: 5,3 g/l. Al2(SO4)3 x 18 H2O: 67 g/lMayer's hemalum solution: This solution does not need to be filtrated prior use and the dye is oxidized in a controlled manner, which renders the results robust and allows a brilliant differentiation of the stained structures. Nuclei are intensive blue, cytoplasm is grey-blue. Density (20 °C): 1,05 g/cm3. pH value (20 °C): 1.8 to 2.2. C.I. 75290: 4.4 g/l. Al2(SO4)3 x 18 H2O: 28 g/l. C6H8O7 x H2O: 0.5 g/l0.2% EOSIN Y solution alcoholic: A ready-to-use solution that can be used for routine staining in the hematoxylin-eosin staining process (H&E) of sample material of human origin. Due to the hematoxylin solution, the nuclei will appear blue to dark violet in color and the Eosin Y solution will stain the cytoplasma and intercellular substances red-orange.
EUKITT®Mounting medium
EUKITT® mounting media are characterized by fast curing, crystal-clear optics, low fluorescence, ideal refractive index, good fluidity and low shrinkage. The preparations are stable over many years without cracking and discoloration. EUKITT® mounting media are colorless and do not change shape, structure or color of the material to be examined. No self-fluorescence under UV light! Delivered in wide neck, unbreakable aluminium bottles.EUKITT®: Gold-standard mounting medium. Particularly preferred for use in coverslippers. EUKITT® resists heat, cold (-17 °C), humidity, daylight and UV light and preserves the original preparations for an unlimited period. Drying time: 20 minutes.EUKITT® neo Spezial: Fast drying, xylene free mounting medium. Can be directly applied on EtOH or i-PrOH. Washing with xylene can be omitted. Modern formulation approach using a sustainable, renewable raw material as a solvent. Pleasant odour. Drying time: 15 minutes.EUKITT® UV R: Curing with a single click. Mounting medium which is very quickly cured by UV-light. Only 50% of the amount of standard mounting media are needed. EUKITT® UV R can be directly applied on EtOH or i-PrOH and does not present any health risks. Suitable for all tissue types. Curing time: 10 to 30 seconds.
Histology Freeze Plate HPLAT-30
Ultra-cold surface freezes samples quickly, reduces overall processing time by 40 % or more136 in² (877 cm²) freezing surface accommodates multiple specimens simultaneouslyCleanable air filterIncludes freeze plate coverTemperature range:-30 °C fixedReservoir/Tank material:Stainless steelWorking access (Ø x D):368 x 238 mmMaximum ambient temperature:35 °CDimensions (L x W x H):403 x 467 x 267 mmWeight:34.4 kgPower supply:240 VAC / 50Hz
Paraffin Wax Dispenser MH8524
The Paraffin Wax Dispenser delivers quickly and conveniently on-demand molten wax, e.g. for histological applications.. It is designed for melting up to 6 kg of pelletised wax at a time, and has a large 7.5 l capacity tank.Anti-microbial coating (Ag+) to inhibit growth of bacteriaSafety features include over-temperature cut-out at 120 °CHeated tap and inner filter screen (0.5 mm mesh) to prevent blockagesNon-drip lever tapSmall footprintSpecificationsCapacity:7.5 lTemperature:Ambient ... 70 °CDisplay:
Resolution/Accuracy:Digital
1 °C / ±1 °CMaterial:Stainless steelHeater Power:480 WDimensions (W x D x H):181 x 500 x 455 mmWeight:7 kgPower supply:220-240 V, 50/60 Hz
Paraffin wax
The paraffin wax offers best properties and results for tissue embedding in histological routine.Melting point: 56 to 58 °CMultiple filtered and free of DMSOHigh degree of elasticity with minimal shrinkage
Histofluid mounting medium
Histofluid is a water-clear adhesive of acrylic resins dissolved in xylene. It hardens fast and due to its optical properties suits perfectly well for embedding microscopic preparations. Shortly after having covered a preparation it can already be examined and filed. Histofluid may also be used to firmly lock and seal bottle caps. long storing or temperature changes do not cause fissures or deformations in Histofluid layersdoes not turn yellowish when being exposed to UV-radiationdoes not fluorescencedoes not form bubbleseven sensitive colorations are preserved due to its acid number = 0refractive index of 1.5 (nD 20 °C) is adjusted to the microscope slide and cover glasswater-repellent and dissolves in, for example, xylene, acetone, chloroform, dioxan and toluolcan be stored in sealed bottles for an unlimited periodfilled into special bottles designed for hazardous materials and bearing the UN codeFor research and development only - no IVD.
PARAPLAST®Tissue-embedding wax
Granules for embedding tissue. PARAPLASTPLUS® additionally contains dimethyl sulphoxide (DMSO) which improves speed and penetration into tissue samples. Melting point: 55 - 57 °C.
Microscope slide drying bench, MH 6616
Slide Drying Bench aids in the preparation of microscope slides at the specimen mounting stage. It complements both the Paraffin Wax Dispenser and the Paraffin Section Flotation Bath to provide a complete set of paraffin wax sampling equipment for the modern laboratory. Accepting up to 50 slides (26 x 76mm), it has the facility for drying slides in different orientations- across the drying support bars, angled from the bars, or flat without the bars.Up to 50 slides capacitySlides can be arranged on the bench in different orientationsBuilt-in energy regulator controlling temperature up to 100 °CMaterial:Base and top powder-coated aluminiumMax Element Temperature:100 °CDimensions (D x W x H)180 x 390 x 95 mmWeight1.8 kgElectric Requirement230 V, 50 / 60Hz, 150 W