Sealing Films, self-adhesive
In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment. In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment.
Sealing Films, self-adhesive, for automation processes
In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment. In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment.
PCR tubes strips of 8, PP, with detached cap strips
The extra-thin walls allow for even heat transfer during the process of heating and cooling for short cycle times. BIO-CERT® PCR QUALITY, free of DNase, DNA, RNase and endotoxins.The caps seal the vessels reliably, effectively protecting your samples from evaporation and contamination. They are easy to open and close.
96-well PCR plates, PP, non-skirted, with elevated well rim
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well non-skirted PCR plates are suitable for most commercially available thermocyclers.
96-well PCR plates, PP, semi-skirted, with elevated well rim
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
PCR Plates 384-well, PP
BIO-CERT® PCR-Quality. The thin walls allow fast transmission of the temperature specified by the cycler, thus reducing cycle times. The stable design of the plates makes them ideal for automation, as they can be gripped by robot systems without twisting. To minimize evaporation with small sample volumes up to 2 µl, the plates can be sealed with appropriate sealing films.For automatic high-throughput analysesDNase-, RNase-, DNA-, and endotoxin freeManufactured under controlled cleanroom conditions
96-well PCR plates, PP, semi-skirted, for Roche® LightCycler® 480
The ultra thin-walled PCR plate design facilitates constant, rapid and precise heat transfer. The smooth vessel interior minimizes the binding of enzymes and nucleic acid to the walls. The rim of the wells are designed to protect against cross-contamination, allowing a reliable seal with the sealing mats tailored to the plates. With alphanumeric code and cut corner for easy orientation.96-well semi-skirted PCR plates can easily be labelled or tagged with a barcode.
Package BRAND® Premium semi-skirted PCR plates + BRAND® PCR sealing film, for Roche® LightCycler® 480
BRAND® Premium PCR platesUltra-thin walledEven and rapid heating of all samplesReinforced plate deckNo warping, no wiggling, for use with robotsFree of DNase, DNA, RNase and endotoxinsBRAND® PCR sealing filmHighly transparent for qPCRNon-tacky surfacePress-to-sealConvenient end tabsNo annoying adhesive residuesEvery package includes 50 PCR plates 96-well and 50 qPCR sealing films (Art. Nr. 4.000 237).Suitable for qPCR
24/48-well PCR plates, non-skirted, PP
Ultra-thin wall design facilitates rapid and steady heat transfer. Smooth interior tube surface minimises binding of enzymes and nucleic acids. Raised rims of wells protect against cross-contamination and provide tight seal particularly in combination with new sealing mats. The 24/48 well plates reduce material costs and allow work on a compact PCR plate even with small sample throughputs.Suitable for most types of standard thermal cyclersBIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
PCR adhesive film and foil
Ideal for sealing PCR plates.PCR clean: Certified free from human DNA, DNase, RNase and PCR inhibitorPCR Film: Allows visual monitoring of samplesPCR Foil: Easy to pierce, no sticking of the pipette tips (ideal for automated systems)Heat Sealing: Position the film or the foil with the adhesive edges on the plate. Seal the plate using the heat sealerSealing mats are reusable and autoclavable
PCR plates, 96/384 well Eppendorf twin.tec® microbiology
Purity, stability, color and other features to facilitate laboratory work.Extremely thin-walled polypropylene wells guarantee an optimal temperature transferExceptionally stable and torsion-resistant polycarbonate frameElevated well edges ensure effective sealing and reduce the risk of cross-contaminationBatch-tested and certified free of DNA, DNase, RNase and PCR-inhibitors (PCR clean), additionally free of bacterial DNAAutoclavable up to 121 °CAvailable with bar code (on request)
Accessories for Gel Electrophoresis Tank MultiSUB Choice
MC = Multichannel compatible with consecutive loading.MCSS = Multichannel compatible with alternated loading - every second well
Agarose for gel electrophoresis
This agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendoosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments. AG agaroses are also very environmentally friendly, being manufactured by a process which excludes organic solvents. Also available as low melting point agarose for nucleic acid recovery and enzymatic applications (Cat. No. 4.658 455) and as High Resolution PCR grade agarose for separation of small DNA fragments of up to 800 bp (Cat. No. 6.270 615). Other packing sizes on request.SpecificationsAG | LMA | HRACAS:
Appearance:9012-36-6 | 39346-81-1 | 39346-81-1
White to off-white powderEEO:≤ 0,13 % | ≤ 0,1 % | ≤ 0,1%Gelling Point:36 °C ±1,5°C (1,5 % gel) | 26-30 °C (1,5 % gel) | ≤ 33 °C (1,5 % gel)Melting Point:88 °C ±1,5°C (1,5 % gel) | ≤ 65 °C (1,5 % gel) | ≤ 70 °C (1,5 % gel)Solubility:Clear, colourless solution at 1g in 100ml waterMoisture: 10 %Gel Strength:≥ 1200 g/cm2 (1% gel) | ≥ 200 g/cm² (1% gel) | ≥ 750 g/cm² (1,5% gel)Sulphate: 0,20 % | ≤ 0,1 % | ≤ 0,1 %DNase, RNase, Protease, Endonuclease:None Detected
PCR Cabinets Type Streamline®/Airstream®
Active PCR Cabinet with built-in UV Decontamination and true vertical laminar airflow.Average Airflow Velocity (adjustable): 0.3 m/sHEPA filter with pre-filterThe air cleanliness within the work zone is better than ISO Class 5Sentinel-Microprocessor maintains steady blower speed (only 0.9 m and 1.2 m models)Hinged polycarbonate front windowTempered glass side panelISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.Fluorescent lighting provides superior illumination of the work zoneBuild-in UV lamp with timerPass-through ports in the back wallOptions on request:Support stands
Thermocycler Alpha Cycler
The Alpha Cycler family form PCRmax provides a range of features which are specifically designed to meet the needs of modern researchers when amplifying DNA. Given the flexibility in format and block options (96 or 384 well) scaleability is core in the Alpha Cycler range. Alpha Cycler software has features such as recently used programmes, allowing users to quickly access their most commonly used protocols without the need to navigate through folders to find it, individual user logins, with protected protocols. The Alpha Cycler systems also contain a novel programme wizard which allows users to define a protocol based specifically on their primer sequence and template source. Primer sequences or TM's are entered, amplicon length and source defined and the on board algorithm generates an optimised protocol for your assay. The Alpha Cyclers range of block options allow for use of the most commonly used consumables from different manufacturers and includes 96 well plates (0.2 ml), tubes (0.2 ml), strip tubes (0.2 ml) and 384 well plates.Single, dual or four block options available with either 96 or 384 well gradient blocksMulti-block units have totally independent blocks for maximum flexibilityHD Android driven touchscreen interface for simplified programmingGenerate and send instrument reports to diagnose the health of your system and identify any issues before they impact users workLock programs with user defined passwordAlpha Track mobile app allows remote monitoring of run progressAlpha Track App (free of charge): Track the progress of runs and health of your system remotely via the mobile appThe Alpha Track Application is used in conjunction with your Alpha Cycler and allows users to:Remotely track the progress of runsSend a health report for diagnosis by the technical support teamBe notified of any issues and prevent system failures before occurringSpecificationsBlock temperature:10 to 100 °CBlock uniformity at 55 °C:±0.3 °CTemperature accuracy at 55 °C:±0.25 °CMax. Heating rate:3.4 °C/s
Plasmid Purification-Kits High-Speed / Fast Ion
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.SpecificationsMini Kit // Midi KitMethod:Spin column // Anion-ExchangeSample size:1 - 5 ml // 50 ml high-copy plasmid / 100 ml low-copy plasmidBinding capacity:30 µg // 800 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:10- 30 µg // 200 - 800 µgOperation Time:15 min. // 120 min.
Plasmid Purification-Kits I-Blue Mini / Midi
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer. The test kit contains the I-Blue Lysis Buffer, an optional colour indicator. The use of this indicator prevents common handling errors that impair efficient cell lysis and neutralization.Fast extraction timeHigh yieldPrevention of handling errors during cell lysis and neutralisation by I-Blue colour indicatorSpecificationsI-Blue Mini Plasmid Kit // I-Blue Midi Plasmid KitMethod:Spin column // Anion-ExchangeSample size:1 - 7 ml // 50 - 100 ml high-copy plasmid / 100 - 150 ml low-copy plasmidBinding capacity:50 µg // 500 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:up to 50 µg // 200 - 500 µgOperation Time:15 min. // 80 min.
Gel/PCR DNA Fragment Extraction Kit
The test kit was developed to obtain or concentrate DNA fragments from agarose gels, PCR or other enzymatic processes.The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are 90 - 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.High recovery rateShort process timeOne test kit for two methodsSpecificationsSample size:up to 300 mg of agarose gel / up to 100 µl of PCR productBinding capacity:10 µg DNAFragment size:10 kbTypical yield:80-90% gel extraction / 90-95% PCR clean-upOperation Time:20 min.
Spin Columns, glass fibre filters
Spin column system consisting of filter tubes with glass fibre filter and collection tubes. For the use of leftover reagents from IBI I-Blue MINI Plasmidpurification-Kits (IB47170, IB47171, IB47172), Gel / PCR / DNA Fragment Extraction Kits (IB47010, IB47020, IB47030), Plasmidpurification-Kits High-Speed MINI (IB47101, IB47102) or similar products from other suppliers using a binding, washing and elution method. Sample size, binding capacity and elution volume listed in the specifications must be observed.SpecificationsGel Fragment Extraction Kit // Plasmidpurification-KitsSample size:300 mg agarose gel / 100 µl PCR product // 1 - 4 ml bacterial cultureBinding capacity:up to 10 µg // up to 30 µgElution volume:20 - 50 µl // 50 - 100 µl
MIDI / MAXI Plasmid Columns, Gravity Flow
For the use of leftover reagents from IBI I-Blue MIDI Plasmid purification-Kits (IB47181), Plasmid purification-Kits MIDI Fast Ion (IB47111), Plasmid purification-Kits Maxi Fast Ion (IB47122), Plasmid purification-Kits Maxi Fast Ion, endotoxin-free (IB47125) or similar products from other suppliers using a binding, washing and elution method. Sample size and elution volume listed in the specifications must be observed.SpecificationsMIDI // MAXISample size:50 ml for high copy and 100 ml for low copy // 100 ml for high copy and 250 ml for low copyYield:up to 250 µg // up to 500 µgElution volume:8 ml // 12 mlOperation time:120 min. // 150 min.
Fast PCR-Tubes 0.1 ml, 8 tube-strips with separate cap strip
The Fast PCR tube strips made of polyethylene transfer heat much better and faster than tubes made of traditional plastics. They are particularly suitable for use with Fast PCR reagent kits and for cyclers with high heating and cooling rates. Under these conditions, the following results higher yield and significant time savings.Suitable for PCR, Fast PCR and Real Time PCRIncreased thermal conductivity through PE tubesHigher yield and significant time savingsCan be used in any cycler for 100 µL volumesLid strip PPWith flat or domed lidCertified PCR clean
Plasmid Purification-Kits Maxi Fast Ion
For rapid and efficient extraction of plasmid DNA from bacterial cells. The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.Fast extraction timeHigh yieldStandard version or endotoxin-free version (<0.10 EU/µg) availableSpecificationsMethod:Anion-ExchangeSample size:200 - 800 ml high-copy plasmid / 500 - 1600 ml low-copy plasmidBinding capacity:1.5 mgFragment size:1 - 20 kbTypical yield:1 - 1.5 mgOperation time:180 min.
Thermo Scientific Savant™ DNA 130 SpeedVac™
The easy-to-use, small capacity Thermo Scientific Savant DNA 130 is the ideal choice for nucleic acid applications. The high-performance DNA SpeedVac Concentrator offers rapid and efficient concentration, and drying of small-volume DNA/RNA samples.Corrosion resistant, PTFE coated chamber provides years of lasting serviceBuilt-in, oil free vacuum pump provides maintenance-free operationIntegrated and compact designExtremely quiet operationChoice of three drying rates.Dual digital timers for independent control of heat and run timesSolvents and Solvent Combinations - DNA 130: PCR buffers (aqueous), Water, Ethanol and waterDNA concentrator with integrated pump, plexiglass lid and RD36 rotor for 36 microtubes (1.5 & 2.0 ml)SpecificationsMax. Vacuum:10 Torr (13 mbar)Displacement volume:30 l/min at 50 HzChamber temperature:35 ... 65 °CAmbient temperature:17 ... 32 °CDimension (W x D x H):64 x 29 x 31 cmWeight:39 kgPower supply:230 V / 50 Hz
Concentrator Savant™ SPD1030 / 2030 SpeedVac™ Kits
The Thermo Scientific Savant SpeedVac concentrators feature a microprocessor control panel with digital display and are easily programmable. Simple installation and operation due to the integrated design.Digital display for viewing and setting parameters (time, temperature, vacuum)Vacuum control for vacuum ramping and ultimate level setting to optimise drying times and eliminate bumping of different solvent mixturesDual timers for independent control of heater and run timeOil-free vacuum source eliminates the need to add/change oilStandard PTFE coated chamberSolvent and Solvent Combinations: Acetonitrile, Ethanol, Methanol, Methylene Chloride, Water and other organic solventsScope of supply: SpeedVac system incl. oil-free diaphragm-vacuum pump, vacuum gauge and -50ºC cold trap, HR200-12 rotor 200 x 1.5 ml (SPD1030P1-230 / 2030P1-230) , or without rotor (SPD1030A-230 / 2030A-230), CryoCool heat transfer fluid (1l) and glass condensation flask (GCF400)SpecificationsMax. Vacuum:10 Torr (13 mbar)Displacement volume:30 l/min at 50 HzChamber temperature:35 ... 80 °CAmbient temperature:17 ... 32 °C-Refrigerated Vapor Trap:4 l / -50 °C (approximate value)Dimension (W x D x H):79 x 71 x 49 cmWeight:93 kgPower supply:230 V / 50 Hz
Electrophoresis package MSSCREENTRIO-PP500
Combination package for any horizontal electrophoresis application. Ideal for starting work on electrophoresis techniques.Electrophoresis tank multiSUB Screen offers a selection of 3 gel tray sizes (26 x 16 cm, 26 x 24 cm and 26 x 32 cm) and is equipped with buffer recirculationPower supply PowerPro can operate agarose gels at up to 500 V and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Screen TRIO, power supply PowerPro 500
Electrophoresis package MSCHOICETRIO-PP300
Combination package for any horizontal electrophoresis application. Ideal for starting work on electrophoresis techniques.Electrophoresis tank multiSUB Choice offers a selection of 3 gel tray sizes (15 x 7 cm, 15 x 10 cm and 15 x 15 cm) and can thus be used flexiblyPower supply PowerPro can be operated in constant mode or programmed and has 5 output pairsScope of supply: Electrophoresis tank multiSUB Choice TRIO, power supply PowerPro 300
Electrophoresis package MSMIDIDUO-NANO300
Combination package for any horizontal electrophoresis application. Ideal for starting work on electrophoresis techniques.Electrophoresis tank multiSUB Midi can process up to 100 samples and each platinum electrode is recessed in a removable cassette to protect it from damagePower supply nanoPAC with two-step function for changing the programming of voltage, current and time during the runScope of supply: Electrophoresis tank multiSUB Midi DUO, power supply nanoPAC-300P
Sealing Films, self-adhesive, Filmstrips
In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment. 50 pieces à 8 strips.
Sealing Films, self-adhesive, Foilstrips
In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment. 50 pieces à 6 strips.
Cooling Block Systems, FreezeBox™
Blue. FreezeBox™ is a new, energy-saving, environmentally friendly and safe cooling equipment, without additives. It does not require electricity (except for pre-cooling the cores in the freezer) and no ice for low-temperature cooling of biological samples. The system can be used ice-free, is lightweight, easy to transport and ideal for the collection and storage of biological samples. It can be combined with interchangeable cores and different tube modules. Cooling cores can be tempered in a refrigerator or freezer and inserted into the FreezeBox™. For operation with dry ice, leave out the cooling core and fill with 200 g dry ice instead.For use with cooling core, ice or dry iceEasy to clean and disinfectDurable, suitable for frequent useEasy to mount
PCR tubes strips of 8, PP, with attached single caps, 3 ridges
The extra-thin walls allow for even heat transfer during the process of heating and cooling for short cycle times. BIO-CERT® PCR QUALITY, free of DNase, DNA, RNase and endotoxins.The caps seal the vessels reliably, effectively protecting your samples from evaporation and contamination. They are easy to open and close. The highly transparent cap makes them ideal for a quantitative Real Time PCR.
96-Well PCR® Rack, Low-Temp
The PCR® rack base is made from robust ABS construction, and the lid is made from PC. Versatile Rack for use on a bench top or for freezer storage.Storing of tubes down to -80 °CHolds 0.2 ml individual tubes or stripsAmbidextrousDetachable lidStackable