Micro tubes, PP, without screw cap
Operating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Screw caps, PP, for micro tubes
With silicone sealOperating range: -196 °C to 121 °CBIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Microtubes, PP, with screw-cap, PP
With silicone sealMatt label fieldOperating range: -196 °C to 121 °CAutoclavable at 121°C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Deep well plates
Developed for a range of uses, e.g. High-Throughput Screening (HTS), general analysis which requires a master reservoir plate, cell and tissue culture, sample storage, etc. Deep well plates can be used with all leading robotic systems and other autosampling devices.96 well: 12 x 8 array, 384 well: 24 x 16 arrayHigh chemically-resistant polypropylene (e.g.: against DMSO, phenol, chloroform)ANSI/SLAS formatAlphanumeric well codingPlates suitable for freezing down to -80°C (PP) or -20°C (PS)One notched corner ensures correct orientation.StackableDNA-, RNase-, DNAse -free
Sealing mats
Cover mats reduce the maximum volume of wells. Adhesive sealing films can also be used.
96-tube racks, for use with robots
Thanks to the stable connection between the mounting plate and the racks, the stackable SBS racks are especially well-suited for use with robots and other automated dispensing systems. Coded tubes (A1 - H12) and rack sides suitable for barcode labels simplify sample organization.Tubes and rack are autoclavable at 121 °C (2 bar), acc. DIN EN 285Tubes, racks, and lids can withstand temperatures as low as -80 °CThe seal of the tubes is pressure-tested
LLG-Centrifuge tubes, PP
Polypropylene tubes with very good thermal, mechanical and chemical stability. With screw closures. Sterile tubes with screwed-on closure. Packed in boxes or bags. With graduations and labelling area.Sterile centrifuge tubes are free of cytotoxicity, DNase/RNase-free and human DNA-free.For research and development only.
Sealing mats Nunc™, 96-well, silicone
The pre-slit sealing mats are designed for use with shared wall microtiter plates and allow penetration into the well using a pipette tip or probe without damaging the caps. To store chemicals or compounds and to prevent contamination and evaporation of the well contents.Chemical resistantSolvent-resistantPierceableTemperature resistant down to -80 °C
Deep Well Plates Nunc™, 96-well, PS
The plates are suitable for agglutination tests, sample collection and storage.TransparentRound bottom for optimal sample recoveryAlphanumeric grid allows quick and easy identification of samplesFor use with robots and liquid handling systemsCan be closed with sealing mats and adhesive foil
Deep Well Plates Nunc™, 96-well, PP
The plates are suitable for sample collection, storage, combinatorial chemistry, substance libraries, bacteria and yeast cultures and as collection plates for Nunc filter plates. They are resistant to most chemicals, solvents and alcohols used in combinatorial chemistry.Colour naturalWith shared wall technologyRound bottom reduces fluid retention
Reaction tubes Safety-Cap, PP
The cap lock ensures an optimum tightness and prevents uncontrolled opening.GraduatedCertified free of RNase, DNase, human DNA, PCR inhibitors, pyrogens and ATPHigh chemical resistanceLabeling fields on the cap and tubeManufactured in clean room ISO 8Autoclavable with opened cap at 121 °C, 20 minCan be used down to -80 °C
Deep Well Plates, 96/48-well, PP
Deep-well plates from Ratiolab are available as standard or low profile version with different volumes from 1,2 to 4,6 ml for each well.Available with U-bottom (low profile + standard) and as V-bottom versionSBS standard micro test plate formatWells with significantly larger cross section for reduced cross-contaminationImproved visual control due to clear polypropylene1,2 ml low profile is about half as high as conventional deep-well plates30 % less storage space when using low profile platesAutoclavable at 121 °C, 20 minTemperature resistant to -80 °C8 x 12 wells with alphanumeric code in micro test plate formatPrecise design, for use in automatic pipetting systems for High Throughput Screening (HTS)Optimum space for bar code labels on the side wallsSpace-saving and stackable
Deep-Well Plates, 96/384-well, PP, PCR clean
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackablePCR clean: free of human DNA, DNase, RNase and PCR inhibitors
Deep-Well Plates, 96/384-well, PP, sterile
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackable
Deep-Well Plates DNA LoBind, 96/384-well, PP
DNA LoBind plates for maximum sample recovery from nucleic acids by reducing the binding of the sample to the surface. Suitable for preparation or storage of DNA and RNA samples, forensic trace analysis, preparation of dilution series in quantitative qPCR, sample preparation in next-generation sequencing and creation of genome or oligonucleotide libraries.PCR clean: free of human DNA, DNase, RNase and PCR inhibitorsHigh-contrast, alphanumeric letteringFrame white or blueRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing
Deep-Well Plates, 96/384-well, PP, with barcode, PCR clean
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackablePCR clean: free of human DNA, DNase, RNase and PCR inhibitors With barcode
Deep-Well Plates, 96/384-well, PP, with barcode, sterile
High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackableWith barcode
Deep-Well Plates DNA LoBind, 96/384-well, PP, with barcode
DNA LoBind plates for maximum sample recovery from nucleic acids by reducing the binding of the sample to the surface. Suitable for preparation or storage of DNA and RNA samples, forensic trace analysis, preparation of dilution series in quantitative qPCR, sample preparation in next-generation sequencing and creation of genome or oligonucleotide libraries.PCR clean: free of human DNA, DNase, RNase and PCR inhibitorsHigh-contrast, alphanumeric letteringRounded RecoverMax®-Well-DesignElevated well frames for reliable sealingWith barcode
Eppendorf Tubes®, PP, amber, with screw cap, HDPE
For cell culture applications, sample preparation and storage of samples and solutions.ConicalTemperature resistant from -86 °C to 100 °CFor light-sensitive samples
Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedOperating temperature range -86 °C to 100 °CFor light-sensitive samples
DNA LoBind Tubes, with screw cap
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
Protein LoBind Tubes, with screw cap
Minimum protein loss (less than 3%, BSA 1µg/ml)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP manufactured under optimized conditionsHighly transparent
LLG-Centrifuge tubes economy, PP
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Eppendorf tubes SnapTec®, PP
Transparent. For cell culture applications, sample preparations, storage and transport of samples. The SnapTec® lids allow single-handed opening and closing for quick liquid extraction or addition.ConicalSingle handed operationTemperature resistant from -86 °C to 100 °CAutoclavable at 121 °C, 20 min.
Eppendorf Tubes, PP, with screw cap, HDPE
For cell culture applications, sample preparation and storage of samples and solutions.ConicalTemperature resistant from -86 °C to 100 °C
Eppendorf Tubes® 25 ml, PP, starter pack, with screw caps
Transparent. For cell culture applications, sample preparations, storage and transport of samples.ConicalSingle-Handed OperationTightness from -86 °C to 100 °CMax. RZB 17000 x gLow height Scope of supply:200 Eppendorf Conical Tubes® 25 ml with screw cap, PCR clean, 4 single tube stands, 6 adapters for rotors with bore for 50 ml conical tubes
Storage plates 96-well
Thermo Scientific™ Abgene™ polypropylene microplates and DeepWell plates provide storage security for assays, mixed libraries or storage of samples for intermediate or long-term use.
DNA Microtubes CapLock LoTrace®, PP
For low content DNA sample preparation and assay.Double-Lock™ cap closing systemLow binding DNA surfaceFree of RNase, DNase, human DNA, endotoxins, PCR inhibitors, ATPManufactured under clean room conditionsTemperature range -195 up to 121 °CAutoclavable
Reaction tubes with attached lid, PP, BIO-CERT® PCR QUALITY
For PCR-setups, storage of PCR samples and other applications with high cleanliness requirements.Tight sealing snap lidCan be opened and closed with one handGraduatedFree of human DNA, RNase, DNase, pyrogenes and PCR inhibitorsAutoclavable at 121 °C (2 bar) according to DIN EN 285
Eppendorf Tubes®, PP, with 2D SafeCode
Eppendorf Tubes® with two-level coding (clear coding, 2D datamatrix code) for safe sample identification. Code reading is possible even up to 30 % damaged code. Data processing software is optionally available, further information on request. SterileConicalWith screw capPyrogen-, DNase-, RNase- and DNA-freePre-coded for immediate useTemperature range: -86 °C to 121 °C
Eppendorf Tubes® BioBased, PP, with screw cap, HDPE
Eppendorf Tubes® BioBased are made of 90 % bio-based plastic. In the bio-based polymer production, fossil raw material is replaced with sustainable raw material produced from bio-based waste and residues. For cell culture and cell biology applications, as well as for sample preparation in microbiology and molecular biology laboratories.SterilePyrogen-, DNase-, RNase- and DNA-freeLid with grooved sidesLarge labeling fieldISCC PLUS and ACT certification
DNA LoBind Tubes, with snap-on lid
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
Eppendorf tubes SnapTec®, PP, amber
Transparent. For cell culture applications, sample preparations, storage and transport of samples. The SnapTec® lids allow single-handed opening and closing for quick liquid extraction or addition.ConicalSingle handed operationTemperature resistant from -86 °C to 100 °CAutoclavable at 121 °C, 20 min.For light-sensitive samples
Safe-lock Tubes®, PP, with 2D SafeCode
Eppendorf Tubes® with two-level coding (clear coding, 2D datamatrix code) for safe sample identification. Code reading is possible even up to 25 % damaged code. Data processing software is optionally available.PCR cleanWith snap capHigh chemical and physical resistancePre-coded for immediate useDesigned and manufactured under ISO 13485 and ISO 9001