Heat transfer liquid Kryo 30
Heat transfer liquid with high heat capacity. Ideal for applications in open and closed temperature control circuits.Water-glycol mixture with very good frost resistanceConforms with REACH and RoHsDo not use on devices with cascade cooling.
Tempering liquids for dynamic temperature control systems PRESTO
Long-term tested for safe and reliable operation. Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
ProfiNet Interface
The ProfiNet interface is a protocol converter from ProfiNet to RS232. Application interfaces RS232, 422, and 485. Bus interface ProfiNet 2Port. Mounting on DIN top-hat rail.
Temperature hoses, stainless steel 1.4404, single insulation
Temperature hoses with special single insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4.6 bar (at 200 °C).
MaloClean Aquastabil
Stabilising agent for water baths, thermostats etc.Should be prepared with distilled water if possible.Attention: Toxic to aquatic organisms with long-term effects. Avoid release into the environment.
Heat transfer liquid Kryo 60
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Kryo 65
Heat transfer liquid based on mineral oil. Ideal for applications in closed temperature control circuits and surface-sensitive applications.Low viscosity, for temperatures below 0 °CSilicone-free mediumNon-corrosiveConforms with REACH and RoHsNot suitable for use with EPDM tubing.
Heat transfer liquid Kryo 70 A
Heat transfer liquid based on silicone oil. Ideal for applications in closed temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CThermally stabilized, for use at temperatures above 200 °CNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Kryo 95
Heat transfer liquid based on silicone oil. Ideal for applications in open and closed temperature control circuits.Temperature range for open systems: -95 to 60 °CTemperature range for closed systems: -95 to 160 °CChemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Ultra 301
Heat transfer liquid based on mineral oil. Ideal for applications in open and closed temperature control circuits, as well as for surface-sensitive applications.Temperature range for open systems: 40 to 230 °CTemperature range for closed systems: 40 to 300 °CSilicone-free medium
Tempering liquids
Long-term tested for safe and reliable operation.Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Temperature hoses, stainless steel 1.4404, triple insulation
Temperature hoses with special triple insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4 bar (at 350 °C).
Heat transfer liquid Therm 180
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Colourless heat transfer liquid enables visual control during temperingChemically inert and environmentally friendly synthetic silicone oilNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Ultra 350
Heat transfer liquid based on mineral oil. Ideal for applications in open and closed temperature control circuits.Temperature range for open systems: 30 to 200 °CTemperature range for closed systems: 30 to 350 °CNot suitable for use with EPDM tubing.
Tempering liquids for high temperature circulators Forte HT
Long-term tested for safe and reliable operation.Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Thermal fluids SilOil
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.Temperature ranges refer to use in closed systems.
Thermal fluids MinOil
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.
Heat transfer liquid Kryo 51
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Kryo 20
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.
Heat transfer liquid Therm 250
Heat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Thermally stabilized, for use at temperatures above 200 °CColourless heat transfer liquid enables visual control during temperingChemically inert and environmentally friendly synthetic silicone oilNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.
New
New
External Pt 100 sensors, double
Sensor for flow or return for external thermoregulation applications.
Heat transfer liquid Aqua 90
Water-based heat transfer liquid. Ideal for applications in open temperature control systems for non-flammable liquids. Stabilized against contamination.
Bath fluid Polyclear Mix 30 Plus
Prevents premature rusting and the growth of algae. Ideal for use in circulators, water baths, shaking water baths or heating baths. For routine applications from 5 to 90 °C.
Water bath stabiliser ThermoClean DC
Stabilising concentrate with blue indicator for water circulation systems, such as water baths or circulators. Prevents the growth of algae, bacteria and mould. Also suitable for closed temperature control systems.Prevents odour formationNo foam formation100 % water soluble
Heat transfer liquid Therm 160
Heat transfer liquid based on polyethylene glycol. Ideal for applications in baths and open temperature control circuits.Cold water solubility in measurement and calibration applicationsConforms with REACH and RoHsCannot be used with bath vessels made of polycarbonate.
Bath fluid Algicide Aquastab
Protective agent for the prevention and control of algae formation in bath thermostatsRecommended dosage: 5 mL / 10 litres of water2 % poly(dimethylimino)-2-hydroxy-1,3-propanediyl chlorideUse biocidal products with care. Always read the label and product information before use.
Beakers, glass, jacketed, type T
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.
Beakers, glass, jacketed wiht PTFE-Olive, type T-GL
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.