CO2 Incubator Midi 40 with small volume
The Thermo Scientific Midi 40 CO2 incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40 l) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO2 incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO2 and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1 °C.Precise and reliable CO2 control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.Removable water reservoir: generates relative humidity values up to 95 % with rapid recovery rates that promote optimal cell growth.Heated inner glass door: provides sample security while preventing unwanted condensation.Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.
CO2 Incubators with Chambers Heracell™ 150i/240i
Protect valuable samples while optimizing cell growth. CO2 incubators with stainless steel or copper chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.
CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorO2 SensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensor2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorO2 Sensor2 MB built-in flash memory for data and event logging
Copper interior for CO2 incubator CB-S 170
Set consisting of 2 shelves (solid copper) and a water pan (copper-plated).
Stacking adapters for CO2 incubators CB series
Suitable for thermally isolated stacking of two CO2 incubators.
Stacking frames for CO2 incubators CB series
Stable, vibration-free stacking frame on casters with stop brake for safe stacking of two CO2 incubators.
Base frames for CO2 incubators CB series
The base frame equipped with casters is used for the secure positioning and leveling of CO2 incubators.
CO2 incubators CB-O, with O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF, with humidity control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF-O, with humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-S
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionPID controller with LCD display
Divided inner doors for CO2 incubators CB / CBF
Divided inner door with cell therapy compartmentalisation. This option is equipped with additional partition walls for spatial incubation subdivision to prevent mixing up of sample vessels.
Quick sample access for CO2 incubators CB / CBF
Viewing window (13 x 25 cm) in the inner door for quick access to the samples.
Door hinge on the left for CO2 incubators CB series
Outer door and standard glass inner door with door hinge on the left.
Alternative O2 control range for CO2 incubators CB / CBF
For controlling O2 concentrations between 10 and 95 vol. % in CO2 incubators.Only in conjunction with model variants with O2 control.
CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell culturesInner door divided into 8 parts with cell therapy compartmentalizationStainless steel inner door with 8 separate glass doors4 shelf levels with 8 insertsIndividual inserts can be pulled out completelyEach level is physically separated by an additional partition wall
Cell Culture Flasks EasyFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesAir jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves
CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesStacking adapter and base with castors includedThe specified values refer to one chamber.
CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesStacking adapter and base with castors includedThe specified values refer to one chamber.
Accessories for CO2 Incubators ICOmed
Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continuously regulatedTwo gas connections with quick release connectors for automatic switch-over of gas cylindersActive microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filterControl of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2;Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °CFurther options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.
CO2 Incubators ICOmed
The CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).fully insulated stainless steel door and heated inner glass doorModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderULPA filtration system with internal blower 90 °C moist heat decon system
CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorder90 °C moist heat decon system
CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderULPA filtration system with internal blower90 °C moist heat decon system