Tube Rack Adapt-a-Rack™, POM
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm
Tube rack, PP
Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification.
LLG-Microtube rack, PP, 80-well, set
Made of Heavy-duty Polypropylene. Designed to hold 1.5 to 2.0 ml microtubes (5 x 16 arrays) in a temperature range from -80 °C to 121 °C. Molded numbers on the surface for easy samples identification. Suitable for autoclaving at 121 °C.Set content: Microtube rack in blue, green, pink, yellow, orangeFor research and development only.
LLG-Microtube racks, PP, 80-well
Made of Heavy-duty Polypropylene. Designed to hold 1.5 to 2.0 ml microtubes (5 x 16 arrays) in a temperature range from -80 °C to 121 °C. Molded numbers on the surface for easy samples identification. Suitable for autoclaving at 121 °C.For research and development only.
Test Tube Racks Mega Rack®, PP
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
Test tube racks Switch-Grid™, POM
This split-frame rack holds up to two different grid inserts. Grid inserts must be ordered separately.Three tier rackWith rubber feetsStackableChemical resistantAutoclavable at 121°C
Tube Rack OneRack® Multi
Tube rack with interchangeable inserts for a wide range of tube types with diameters from 10 to 30 mm. The inserts can be pivoted to either an upper or lower position to accommodate tubes of various heights. Autoclavable.Suitable for tubes from 5 to 50 mlAngled position of the inserts for comfortable pipettingThe open design allows a very good view of the graduation and the filling level of the vesselsUnique shape of the wells (teardrop design) ensures that the vessels stand particularly firmlyAlphanumeric position markingErgonomic handlesScope of supply: 1 x base, 6 x inserts (2 x Ø 10 to 13 mm, 2 x Ø 13 to 17 mm, 2 x Ø 25 to 30 mm)
Tube Rack, HDPE-coated steel
Chemically resistant racks for transport or sample handling. The product range includes racks for most vessel shapes. Accomodates vessels safely thanks to square wells and three holding levels. Mesh or slotted bottom prevent the sample vessels from falling through and enable the loaded rack to be transported. For use at temperatures from -40 to 121 °C. Autoclavable.
Test tube racks, 18/10 stainless steel, demountable
Test tube rack can be dismantled into individual parts.
Test tube racks, PP
The test tube racks sink in a water bath and have numbered and lettered rows for tube identification. Dimensions (W x D x H): 246 x 104 x 64 mm.Colour-codedEnd plates for labelingStackableAutoclavable
LLG-Test tube rack, wire with epoxy powder coating
White. Ideal for storing and transporting test tubes and centrifuge tubes. The second grid provides an optimal hold.
Test tube rack, PP
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Tube Rack, PP
Stackable racks with alphanumerical positions. Operating temperature -20 °C to 90 °C. Autoclavable at 121 °C (2 bar), acc. DIN EN 285. Density 1.2 g/cm³. Will not float in water bath. Racks are supplied in two-pieces (up to Ø 11 mm, for micro tubes) or three-pieces (up to Ø 13 mm for cryogenic tubes) for convenient and permanent assembly.
Test tube racks, 18/10 stainless steel wire
Test tube racks made of stainless steel wire, electrolytically polished.
Tube clamp, plated
Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C.
Tube racks, PP
Will not float. Alphanumeric grid referenced on top tier for easy identification of samples. Stackable when empty. Can be used in freezers or water baths. Autoclavable at 121°C for 20 min.
Mircotube Rack (1.5ml), PP
Two-tier, available in four different colours. These versatile racks are autoclavable and can be used dry, in water baths or in freezers. Each rack has an alpha-numeric reference for easy sample identification. Can accomodate 100x1.5ml tubes with closed caps or without caps, and 50x1.5ml tubes with open caps. Racks are stackable even when loaded and have (purpose) designed label spaces on each side (for bar coding, etc.).
Microtube racks, PP, 96-Well
Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side, and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack.
Microtube racks, PP, 80-Well
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours.Dimensions (L x W x H): 225 x 67 x 28mm
One-Well Connecting Tube Racks, PP
The racks can be plugged together or used as a stand-alone rackFor conical or round-bottom tubesAssorted colors (Blue, Green, Yellow, Orange, Pink)
Test tube racks, OneRack®, POM
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
One-Well wire tube racks, epoxy-coated steel
Yellow. For conical and round bottom tubes.Temperature resistant down to -40°CAutoclavable
Tube standing and draining racks, PP
Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Allows easy viewing of tube contents. Does not float in water baths. User can also turn tubes as well as electrophoresis and chromatography plates upside-down and use as a drying rack. The flexible peg design is suitable for tubes with a diameter of 10mm to 13mm and 14mm to 17mm. Includes embossed indexing and drainage holes.
Universal tube racks, PP
Purple/white. Alphanumeric identification. Side handles for easy transport.
Tube Rack pop-up™, foldable, PP
Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (W x D x H): 255 x 137 x 72mm when expanded, 21 mm high when collapsed.
Centrifuge tube rack Poxygrid®
For storage and transport of large conical and round-bottom centrifuge tubes that cannot stand up by themselves.Heat-cured epoxy coatingResistant to organic solvents, salts, weak acids and weak alkalisTemperature range: -223 ºC to 121 ºCAutoclavable
Rack for centrifuge tubes, ABS
Can be used for tubes with a diameter up to 16 mm. Rack comes as "ready" unit, no assembly is required. Bottom of each tube compartment has a silicone gripping finger that holds the tube at centralised position. Not recommended for autoclaving. With Push & Eject funktion. Holds up to 50 tubes in 5 x 10 layout.
PCR Multirack, PP
Fully autoclavable. This storage/working rack, with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 pieces of 1.5/2.0 ml and 16 pieces of 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing.
Test tube racks, OneRack®, POM, half size
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
Test tube racks OneRack®, PP
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaGood chemical resistanceFurther colours available on request.
Test tube racks, PP
The test tube racks can be easily assembled and disassembled for space-saving storage. StackableShatterproofAlphanumeric markingAutoclavable
Rack for centrifuge tubes, PP
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification.