Reverse osmosis system, Ultra Clear™ RO
The application of low- energy- membranes ensures an efficient and economical operation. The DI models with a pure water output of 20 to 30 litres per hour also include a post-treatment module for residual desalination of permeate.Pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systemsGerm / pyrogen retention rate >99%Modern, maintenance-friendly designmodular flushing for long service lifeComplete, connection-ready systemMenu-driven controller, RS232 interfaceEntrance- and Product water quality will be shown on the display
Reverse osmosis systems, Ultra Clear™ RO EDI
The well-proven Ultra Clear™ RO range has been enhanced to peak water quality level in the plus series by adding electronic deionisation cells. Accessory deionisers for removing inorganic materials from the output are therefore no longer required.Pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systemsGerm / pyrogen retention rate >99%Complete, connection-ready systemMenu-driven controller, RS232 interfaceEntrance- and Product water quality will be shown on the display
Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II, complete system
The compact system converts tap water into ultrapure water (ASTM Type I) and pure water (ASTM Type II) via the filtration cartridge and UV/UF units. The integrated recirculation pump and the sterile ventilation filter protect against contamination and ensure tank water quality.Mounting on the wallLeak detectorWarning message when consumable change is necessaryEasy cleaning due to bottom outlet and large openingTiltable display with simplified user interfaceCode-protected system parametersKit contains a 0.1 µm end filterHand dispenser with 3 m cord optionally available.Scope of supply: Pure and ultrapure water system, pre-treatment system with cartridges, RO/pre-treatment cartridge, ultrapure water cartridge, sterile filter (0.1 μm), UV lamp, UF filter, tank, CO2 aeration filter, sterile overflow, wall mounting
Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II
The compact system converts tap water into ultrapure water (ASTM Type I) and pure water (ASTM Type II) via the filtration cartridge and UV/UF units. The integrated recirculation pump and the sterile ventilation filter protect against contamination and ensure tank water quality.Mounting on the laboratory benchLeak detectorWarning message when consumable change is necessaryEasy cleaning due to bottom outlet and large openingTiltable display with simplified user interfaceCode-protected system parametersKit contains a 0.1 µm end filterHand dispenser with 3 m cord optionally available.
Reverse Osmosis System arium® advance L
The arium® advance L laboratory water systems are designed for a reverse osmosis water requirement of up to 200 L/h.Combined with the integrated 100 or 200 liter storage tank the system provides the ideal volume of pre-treated feed water for your laboratory. The system can simultaneous feed several laboratory instruments at once, thanks to the powerful distributor pump. Its compact, square shape reduces space requirements to a minimum.Scope of supply: Arium® Advance L reverse osmosis system, RO-(reverse osmosis) module, connection kit for system and pre-filter housing, 5 μm pre-filter, activated carbon filter and dual filter housing.
Arium® Smart Station, for benchtop instatllation
The Smart Station is designed dispense pure and ultrapure water from your system or Bagtank.Compact design for easy and space-saving integration in your lab environmentIntuitive touch-activated color display with direct access to all important functionsFlexible and stepless height adjustment to fill different size containers and beakersErgonomic design can be optimized for either right- or left-hand operationAccurate volume dispense for fast and precise buffer and sample preparationAdjustable, splash-free flow rate from drop-by-drop to 2 liters per minute
Arium® Smart Station, for wall-mounted installation
The Smart Station is designed dispense pure and ultrapure water from your system or Bagtank.Compact design for easy and space-saving integration in your lab environmentIntuitive touch-activated color display with direct access to all important functionsFlexible and stepless height adjustment to fill different size containers and beakersErgonomic design can be optimized for either right- or left-hand operationAccurate volume dispense for fast and precise buffer and sample preparationAdjustable, splash-free flow rate from drop-by-drop to 2 liters per minute
Accessories for Arium® Smart Station
The extended tubing set is used for the Smart Station Ultrapure and Pure for uncomplicated extension of the standard supplied tubing set.With the extension set the operating range can be easily increased from 2 up to 4 meter.
Ultrapure water system Ultra Clear™ TP ED Polisher
The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED Polisher models are designed for deionised water feed at conductivity < 20 μS/cm and deliver up to 2 l/min ultrapure water.7" Multi-color touch displayFor deionised water with max. 20 µS/cmTOC oxidation and monitoring (TM)User-guided, integrated disinfection modeTemperature compensation can be switched offEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filters
Ultrapure water system Ultra Clear™ TP ED TWF
The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED TWF ultrapure water systems can be connected directly to the drinking water network (Tap Water Feed) and are supplied with a 30 l or 60 l storage tank for type II water. The built-in reverse osmosis system has a recovery rate of > 30 % to conserve water. An ion exchange module (DI) provides water with < 2 µS/cm from the tank.7" Multi-color touch displayFor tap waterTOC monitoring (TM)User-guided disinfection modeEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filtersDimensions without tank
Ultrapure water system Ultra Clear™ TP ED TWF EDI
The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED TWF EDI ultrapure water systems can be connected directly to the drinking water network (Tap Water Feed) and are supplied with a 30 l or 60 l storage tank for type II water. The built-in reverse osmosis system has a recovery rate of > 30 % to conserve water. The continuous electrodeionisation (EDI) stage purifies RO product water down to a quality range of 0.055 µS/cm (18.2 MΩ-cm). EDI product water can be drawn directly from the integrated storage tank.7" Multi-color touch displayFor tap waterTOC monitoring (TM)User-guided disinfection modeEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filtersDimensions without tank
Accessories for Ultra Clear™ / LaboStar™
* Interval of exchanges depends on raw water quality and throughput
Ultra pure water system OmniaPure xsbasic
For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard dispenser and monitoring unit OptiFillbasic, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Ergonomic, flexible dispenser and monitoring unit OptiFillbasic with graphic displayReal-time display of all operating and performance parametersSetting possibilities for conductivity in MΩ x cm or µS/cmPassword access2 languages selectable: DE, ENLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentApplications:OmniaPure xsbasic: AAS, IC, ICP, buffers and media preparationOmniaPure xsbasic UV: Ultra trace analysis, ICP-MS, HPLC, TOC analysisScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlFeed water conductivity at 25 °C:100 µS/cmDimensions (W x D x H):240 x 435 x 530 mmWeight:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz
Ultra pure water system OmniaPure xstouch
For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions incl. OptiFilltouch dispenser (W x D x H):240 x 435 x 530 mmWeight incl. OptiFilltouch dispenser:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz
Ultra pure water system OmniaPure xstouch, under-bench version with OptiFilltouch wall dispenser
For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaUltra pure water system OmniaPure xstouch in the under-bench version can be installed under a laboratory bench to save space. The external dispenser and monitoring unit OptiFilltouch is positioned on the wall.Scope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions device (W x D x H):240 x 310 x 415 mmDimensions wall dispenser (W x D x H):100 x 460 x 520 mmWeight device:13 kgWeight wall dispenser:2.4 kgPower supply:90 ... 240 V, 50 ... 60 Hz
Ultra pure water system OmniaPure xstouch, under-bench version with OptiFilltouch bench dispenser
For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaUltra pure water system OmniaPure xstouch in the under-bench version can be installed under a laboratory bench to save space. The external dispenser and monitoring unit OptiFilltouch is positioned on top of the bench.Scope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions device (W x D x H):240 x 310 x 415 mmDimensions bench dispenser (W x D x H):150 x 450 x 580 mmWeight device:13 kgWeight bench dispenser:8 kgPower supply:90 ... 240 V, 50 ... 60 Hz
Pure and ultrapure water system Aquanex™, with integrated 10 l tank
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with integrated 10 l tank and pretreatment system Barnstead™
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with external 30 l tank
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
Pure and ultrapure water system Aquanex™, with external 30 l tank and pretreatment system Barnstead™
The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm
De-Ionization pack for pure and ultrapure water system Aquanex™
Pack including right and left DI cartridge.
Deionisers, stainless steel (V4A), empty cartridge, without resin
High quality stainless steel ion exchanger (V4A) pressure resistant up to 10 bar. High quality and longevity, parts in stainless steel in contact with medium. Optimised water distribution.Without conductivity meter. Please order separately.
Deionisers, stainless steel (V4A), mixed bed resin
High quality stainless steel ion exchanger (V4A) pressure resistant up to 10 bar. High quality and longevity, parts in stainless steel in contact with medium. Optimized water distribution.Without conductivity meter. Please order separately.
Accessories and Consumables for Barnstead™ Easypure™ RoDi
Customize your water purification system with the Thermo Scientific™ Barnstead™ Easypure™ RoDi Accessories and Consumables that best suit your application. Cartridge kit includes pre-filter, ultrapure mixed bed cartridge and Easypure high purity/low TOC cartridge.
Pre-treatment cartridges Progard® for water purification systems
The pre-treatment cartridges contain polyphosphates, activated carbon and depth filter for water pre-treatment and serve to protect reverse osmosis membrane against organic fouling, chlorine oxidation, and mineral scaling.