Centrifuge tubes, PP, self-standing
For storage and centrifugation of mid-volume samples.Easy-to-read graduationsLeak proofDNase/RNase free, pyrogen freeCap made of HDPE
LLG-Centrifuge tubes, PP
Polypropylene tubes with very good thermal, mechanical and chemical stability. With screw closures. Sterile tubes with screwed-on closure. Packed in boxes or bags. With graduations and labelling area.Sterile centrifuge tubes are free of cytotoxicity, DNase/RNase-free and human DNA-free.For research and development only.
Centrifuge Tubes, sterilized/unsterilized, PP
Available with round, conical or self-standing bottom.12 ml tubes with snap cap15-50 ml with screw cap, graduation and field for writing
Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedOperating temperature range -86 °C to 100 °CFor light-sensitive samples
LLG-Centrifuge tubes economy, PP
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Eppendorf Tubes® 25 ml, PP, starter pack, with screw caps
Transparent. For cell culture applications, sample preparations, storage and transport of samples.ConicalSingle-Handed OperationTightness from -86 °C to 100 °CMax. RZB 17000 x gLow height Scope of supply:200 Eppendorf Conical Tubes® 25 ml with screw cap, PCR clean, 4 single tube stands, 6 adapters for rotors with bore for 50 ml conical tubes
Test tubes with NS joint, with conical bottom, DURAN® tubing, without stopper
With conical bottom, with socket NS 14/23, made of DURAN® tubing.
Test tubes with NS joint, with conical bottom, DURAN® tubing, with PE stopper
With conical bottom, with socket NS 14/23, made of DURAN® tubing.
Centrifuge tubes, PP, conical, graduated
For the storage and transport of samples.TransparentWhite labelling fieldTemperature resistant from -80 ° C to 121 ° CBlue, tight screw capSterile tubes are pyrogen- and endotoxin-freeAutoclavable
Centrifuge tubes with screw cap
PP. Translucent. Withstands RCF up to 3000 x g. Graduated, available non-sterile and sterilized in 15 ml (graduated up till 13 ml) or 50 ml. Screw cap PE with sealing cone. High clarity.
Centrifuge bottles Nalgene™, BioBottle
Centrifuge bottle with 2L capacity.Separating large volumes up to 12LCentrifugation up to 7333xg, at temperatures from 4°C to 22°CBottle meets the requirements of USP VINon-cytotoxic, not hemolyticPPCO bottle, PP seal screw cap with silicone sealGraduated, total volume of 2380mlExcellent chemical resistanceBefore autoclaving, unscrew the cap and place it on the bottle neckBottles must always be at least 80% filledThe closure design features a two-piece plug and sealing cap to support aseptic handling techniques. Use of the two-piece closure system protects the bottle contents from contamination when the support bridge is applied and removed from the bottle. The plug includes a retaining ring to ensure and maintain the placement of the gasket during use. Dimensions (W x D x H): 111.3 x 175.3 x 209.3 mm.
Conical test and centrifuge tubes, PP, graduated
Supplied with PP tight screw cap. With red cap if sterile.Temperature resistance: -10 to 121 °CSterile versions are pyrogenfreeAutoclavable
Nunc EZ Flip 15 and 50 ml Conical Centrifuge Tubes
The integrated leakproof hinged-cap prevents cross-contamination and lost closures and enables one-handed opening and closing. Clarified polypropylene combines chemical resistance and high-speed tolerance. The tubes feature an ergonomic design, and are compatible with any fixed-angle or swing centrifuge rotor. With graduations and white writing area. The tubes are RNAse/DNAse free, USP Class VI, pyrogen-free, non-cytotoxic and leak-proof.
Centrifuge tubes, PP
Conical centrifuge tubes for applications requiring larger sample volumes.Pyrogen-freeNon-cytotoxicFree of DNase/RNase, human DNA, BSE/TSESterilised by gamma irradiation
Centrifuge tubes, plastic, round bottom, PC, graduated
Transparent. With moulded graduations. Slightly yellowish in colour. Round bottom. The strength of Polycarbonate is reduced when it is autoclaved or cleaned using alkaline detergents.
Centrifuge tubes, PP, metal-free
Metal-free centrifuge tubes made of transparent PP with HDPE lid. A special treatment process ensures that more than 30 types of trace metal elements are kept below 1 ppm. Ideal for sample preparation and storage in trace analysis for environmental tests such as water analysis.Easy-to-read, black volume graduationWith large, frosted labelling fieldLeak-proofSterileDNase/RNase-freeMetal- and pyrogen-freeTemperature resistant from -80 to 121 °CMaterials conforming to USP class VI
Centrifugal filter JetSpin® with 2 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 0.5 mlCentrifuge tube: 2 mlPack of 12 x 25
Centrifugal filter JetSpin® with 15 ml centrifuge tube
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 5 mlCentrifuge tube: 15 mlWhite capPack of 4 x 24
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 8 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 12 x 8
Centrifugal filter JetSpin® with 50 ml centrifuge tube, 24 per box
Centrifugal filter, with microcentrifuge tube and PES membraneThe JetSpin® filter membranes are made from premium polyethersulfone (PES), offering low protein adsorption, rapid filtration speed, and high recovery rates. Their single/double-sided vertical filter structure and support rib design provide a larger filtration area, reduced dead volume, and enhanced structural stability, allowing for higher centrifugal force compatibility while minimizingprocess losses.Inner Filter: 0.5 ml, 5 ml, 15 mlCentrifuge Tube: 2 ml, 15 ml, 50 mlMolecular weight cutoff (MWCO): 3kDa, 5kDa, 10kDa, 30kDa, 50kDa, 100kDa,Material Centrifuge tube: Polypropylene (PP)Material tube cap: High-density polyethylene (HDPE)Material filter: Methacrylate-butadiene-styrene (MBS)Material filter membrane: Polyethersulfone (PES)Single (0.5 ml) /Double-sided (5 ml, 15 ml) vertical filter structure provides an effective filtration area of up to 9.7 cm²Rapidly concentrates samples in 5 – 25 minutes, achieving a concentration factor exceeding 100-foldMinimal void volume, reduces sample loss during centrifugationPrecise black graduations on the tube body with clear MWCO indicators, and writing area for easy markingCentrifugal filter, with microcentrifuge tube and PES membraneInner filter: 15 mlCentrifuge tube: 50 mlWhite capPack of 4 x 24
Centrifuge bottles, PP
Conical centrifuge bottles for large-capacity liquid centrifugation, for large-scale cell harvesting, as well as plasmid and protein purification.GraduatedWith screw capWorking temperature range: -80 °C to 121 °CSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free
Centrifuge tubes, PP, brown
The centrifuge tubes can block 100 % of UV rays. They are designed for storage and centrifugation of light-sensitive samples.
Centrifuge tubes CellSafeTM
ISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Centrifuge bottles CellSafeTM
ConicalISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Centrifuge tubes, PP
Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.
Centrifuge tubes Nunc™, PS
Transparent. The disposable centrifuge tubes are a good alternative to glass and have a high degree of accuracy.
Centrifuge tubes, round bottom, AR glass®, ungraduated
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Centrifuge Tubes Falcon®, PP, sterile, with screw cap
Large volume centrifuge tubes suitable for most standard centrifuges.Sterilised by gamma irradiationMolded graduationsSuitable for decantingAutoclavable
Test and Centrifuge Tubes Falcon®, PS and PP
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (
Graduated centrifuge tubes, conical, PMP
Autoclavable. Withstand temperatures up to 170 °C. High chemical resistance. Good transparency. Cannot be used with naked flame.
Test and Centrifuge Tubes Falcon®, PS and PP, sterile, with screw cap
Conical centrifuge tubes with blue printed graduations and white writing area.Sterilized by gamma irradiationNoncytotoxic and pyrogen-free, RNase/DNase-freeDome-seal screw cap, PE with positive sealFlat-top screw cap, PE for one hand manipulation, provides a level writing areaRacks can be separated into two sections