Concentrate for ultrasonic baths elma lab clean S15
Mildly acidic concentrate for cleaning of laboratory instruments and work pieces. It is suitable for ultrasonic cleaning of stainless steel, non-ferrous and light metals e.g. aluminium, glass and plastics as well as for the passivation of stainless and or chromium-alloyed steels. Brass and copper alloys are brightened up. Removes mineral grease and oil, oxide layers, rust and lime.Application concentration:1 .. 5 % in water, 30 ... 80 ° CPhysico-chemical data:Density:1.082 g/mlpH (concentrate):1.6Ingredients:5 % anionic surfactants, 5 % non-ionic surfactants, benzisothiazolinone (5 ppm), methylisothiazolinone (5 ppm)
Concentrates for ultrasonic baths TICKOPUR R 60
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Intensive cleaner, concentrate. Properties: alkaline, pH 12.3 at 1 %, dosage 2 to 20 %. Based on: surfactants, phosphate-free, silicate-free. For: coke residues, resinous residues, soot, pigments, grease, oils, waxes, silicon oils, coloured fog, drilling, grinding, polishing and lapping residues. Not for light metals, tin, zinc.
Concentrates for ultrasonic baths TICKOPUR TR 13
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Intensive cleaner, concentrate. Properties: alkaline pH 11.9 at 1 %, dosage 0.1 to 10 %. Based on: surfactants, alkalis. For: steel, stainless steel, precious metals, glass, ceramics, plastics, rubber. Not for: light metals, tin and zinc. Against: Resins, coking residues, soot, greases, oils, waxes, pigments, colour fog, grinding, polishing and lapping residues.Transport regulations for dangerous goods have to be observed.
Concentrates for ultrasonic baths STAMMOPUR
STAMMOPUR concentrates have been especially developed for ultrasonic application and are marked CE according to the Medical Devices Directive (MDD). All solutions are environmentally friendly, biodegradable and easy to dispose. STAMMOPUR contains special active substances and adjuvants which achieve an optimal disinfecting and cleansing effect while at the same time sparing the instruments.STAMMOPUR R: Intensive instument cleaning concentrate, phosphate-free, mild-alkaline, application 2 %, pH 9.6 (1 %).STAMMOPUR 24*: Intensive disinfection and cleaning concentrate. VAH-certified-bactericidal, yeasticidal virucidal against BVDV, Vaccinia, HBV, HCV, HIV. Effectiveness EXAM - expertise against H5N1. Free from aldehydes, chlorine and phenol. Application 1 % to 2 %, mildly alkaline, pH 9.9 (1 %). Highly compatible with most materials.STAMMOPUR DR 8*: Instrument disinfection and intensive cleaning concentrate. VAH-certified. Without aldehydes-, phenols and chlorine. Bactericidal, virucidal against Vaccinia, BVDV, Papova, Adeno, HBV, HCV, HIV, H5N1. Application 1 % to 3 %, mildly alkaline, pH 9.9 (1 %).Use biocides safely. Always read the labelling and the product information before use.* Transport regulations for dangerous goods have to be observed.
Concentrate for ultrasonic baths elma clean 10
Alkaline Universal Cleaner suitable for the thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of glass, steel, plastics, ceramics. Cleans also crowns, stainless-steel dental impression trays. Removes blood, saliva, protein- and bone residuals, fats, oils, grinding and polishing pastes. Not suitable for aluminum, zinc or light metal alloys and for plastics that are susceptible for stress cracking (e.g. ABS or PC).Application concentration:5 % in water at 50 ... 80° CPhysico-chemical data:Density:1.05 g/mlpH (concentrate):12 ... 12.5Ingredients:5% non-ionic surfactants, 5% phosphates
Concentrates for ultrasonic baths TICKOPUR R 33
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Universal cleaner, concentrate. Properties: mildly alkaline pH 9.9 at 1%, dosage 3 to 5%. For: metal, light metals, glass, ceramics, plastic, rubber, e-filters, respirators. Against: grinding, polishing and lapping residues, oily and greasy soiling, waxes, silicone films, ink.
Concentrate for ultrasonic baths elma tec clean A3
Alkaline ultrasonic cleaning concentrate. It cleans surfaces made of stainless steel, ferrous metals, titanium and precious metals after mechanical treatment. Removes residues of lapping, polishing and grinding media, of punching oil, drawing grease and high-performance cooling lubricants.Not applicable for aluminium and light metals.Application concentration:3 .. 8 % in water, 50 ... 80 ° CPhysico-chemical data:Density:1.122 g/mlpH (concentrate):13.1Ingredients:5 ... 15 % anionic surfactants, 5 % non-ionic surfactants, 5 % amine-soaps, 5 % phosphates.
Concentrate for ultrasonic baths elma tec clean A5
Alkaline ultrasonic cleaner powder suitable for metal, cast iron, die-cast zinc, aluminium, plastic and rubber surfaces. Removes scaled/gummy oils and greases, waxes, lacquer and paint residues, grinding and polishing agents.Not suitable for plastics that are not alkali-proof or that are susceptible for stress cracking. Check magnesium alloys and coatings for compatibility.Application concentration:3 ... 5 weight %, 50 ... 80 °CPhysico-chemical data:Bulk density:0.920 g/mlpH (1 % solution):~12Ingredients:5 ... 15 % anionic surfactants, 5 % non-ionic surfactants, 30 % phosphates
Concentrate for ultrasonic baths elma tec clean N1
Neutral cleaning concentrate suitable for gentle ultrasonic cleaning of ensembles made from metal, light and precious metals, plastic, glass, ceramics and rubber. Removes oil, grease, polishing, lapping and abrasive materials, dust and fingerprints.Free of alkalies and acids, without smell and biodegradable.Application concentration:Ultrasonic bath:Immersion bath:5 %, 50 ... 80 °C10 %, 50 ... 80 °CPhysico-chemical data:Density:1.07 g/mlpH (concentrate):~9Ingredients:15 ... 30 % anionic surfactants, 5 % non-ionic surfactants, 2-bromo-2-nitropropane-1,3-diol (~35 ppm)
Concentrate for ultrasonic baths elma tec clean S1
Mildly acid cleaning concentrate suitable for non-ferrous metals, aluminium, stainless steels, plastics and glass as well as for the passivation of surfaces of stainless and chromium-containing steels. Brass and copper alloys are brightened up.Removes polishing media, mineral grease and oil, oxide layers, rust and lime.Application concentration:1 .. 5 % in water, 30 ... 80 ° CPhysico-chemical data:Density:1.082 g/mlpH (concentrate):1.6Ingredients:5 % anionic surfactants, 5 % non-ionic surfactants, benzisothiazolinone (5 ppm), methylisothiazolinone (5 ppm)
Concentrate for ultrasonic baths elma lab clean N10
Neutral, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of sensitive parts and laboratory instruments made of metal (incl. aluminium and light metal alloys), glass, ceramic and plastic. Removes gentle emulsions, marking and label residues, lime soap deposits, light greases and oils.Check magnesium alloys before application.Application concentration:Physico-chemical data:Density:~1.059 g/mlpH (concentrate):~7.1Ingredients:5 ... 15 % anionic surfactants, 5 ... 15 % non-ionic surfactants, 5 % phosphates, 5 % polycarboxylatesUltrasonic bath:~2 vol-%, 30 ... 75 °CSplash cleaning:~1 vol-%, 55 °CImmersion bath:~4 vol-%
Concentrate for ultrasonic baths elma lab clean S20
Acidic, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of acid-resistant medical and laboratory instruments made of stainless steel, glass, ceramic and plastic. Removes mineral contamination like lime scales, lime soaps, metal oxides and flux residues after soldering, mineral oils and greases.Not suitable for aluminium, magnesium and light metal alloys. Check acid-sensitive glassy materials before application.Application concentration:Physico-chemical data:Density:1.32 g/mlpH (concentrate):1Ingredients:15 ... 30 % non-ionic surfactants, 30 % phosphates (phosphoric acid)Ultrasonic bath:~1 ... 2 vol-%, 50 ... 75 °CSplash cleaning:~0.5 vol-%, 55 °CImmersion bath:2 vol-%
Concentrate for ultrasonic baths elma lab clean A10
Mildly alkaline, foam-inhibited cleaning concentrate for dip and splash cleaning of laboratory instruments made of metal, glass, ceramic, plastic materials and for glassware. Removes gentle markings, labels, lime soap deposits, greases and oils (incl. greases for ground-glass joints, weakly resinified greases).Check aluminium, magnesium and generally alloys of light-metals before application.Application concentration:Physico-chemical data:Density:~1.08 g/mlpH (concentrate):~11.4Ingredients:5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, 5 % phosphates, 5 % polycarboxylatesUltrasonic bath:~1 vol-%, 50 ... 75 °CSplash cleaning:~0.5 vol-%, 55 °C
Concentrate for ultrasonic baths elma lab clean A25
Strongly alkaline, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of alkali-resistant parts and laboratory instruments, made of metal (including titanium), glass, ceramic and plastic. Removes biological contaminants, grease, oil, abrasives and polishing pastes, resinified and tarry residues, marker and label residues.Not suitable for aluminium, magnesium, alloys of light metals and alkali-sensitive glass. Risk of tarnishing when used for nonferrous metals.Application concentration:Physico-chemical data:Density:~1.14 g/mlpH (1 % solution):12 ... 12.5Ingredients:5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, 5 % phosphates, 5 % polycarboxylatesUltrasonic bath:1 ... 2 vol-%, 50 ... 75 °CSplash cleaning:0.5 ... 1 vol-%, 55 °CImmersion bath:~4 vol-%
Concentrates for ultrasonic baths TICKOPUR TR 3
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Special cleaner, concentrate. Properties: weak acid pH 3.0 at 1%, dosage 5%. Based on: citric acid, surfactants, without phosphate. For: steel, stainless steel, non-ferrous, precious and light metals, glass, ceramics, plastics, rubber. Removes: mineral residues, flash rust, grease, oils, waxes, pigments, grinding, polishing and lapping residues.
Concentrate for ultrasonic baths elma tec clean A4
Alkaline cleaning concentrate for laboratories and workshops. Suitable for cleaning of surfaces made of metal, glass, ceramics, plastics and rubber. Also suitable for inspectional cleaning (e.g. protection masks). Removes cooling lubricant emulsions, lapping and polishing residues, oils, greases, soot and dust. For most mineral oils andgreases demulsifying. Check light metal alloys of the type AlSiMg for compatibility before use.Application concentration:Ultrsonic bath:Immersion bath:2 ... 5 %, 50 ... 80 ° C ~5 ... 10 %Physico-chemical data:Density:1.132 g/mlpH (concentrate):~13Ingredients:5 ... 15 % anionic surfactants, 5 % amphoteric surfactants, 5 ... 15 % phosphates
Concentrates for ultrasonic baths TICKOPUR TR 7
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Universal cleaner, concentrate. Properties: demulsifying, mildly alkaline, pH 8.9 at 1 %, dosage 0.1 to 5 %. Basis: surfactants. For: Metal, glass, ceramics, rubber, plastic. Against: Greases, oils, waxes, pigments, solder pastes, drilling, grinding, polishing and lapping residues.Transport regulations for dangerous goods must be observed.
Concentrate for ultrasonic baths elma clean 305
Alkaline cleaning concentrate for the cleaning of organic and inorganic alkali-proof spectacles, moulds and high precision optics, gemstones, quartz, ceramics and selected plastics. Also for steel, iron steel and titanium surfaces. For the removal of resin, putty/glue, adhesives and traces of selected organic plastics from moulds (e.g. CR 39). Check plastics for compatibility before use. Do not use for light metal (Al, Mg), zinc and tin surfaces.Application concentration:10 .. 50 % in water, 60 ... 85 ° CPhysico-chemical data:Density:1.07 g/mlpH (1 % solution):12Ingredients:5 % amphoteric surfactants, 5 % phosphates
Concentrates for ultrasonic baths TICKOPUR RW 77
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Special cleaner with ammonia, concentrate. Properties: mildly alkaline, pH 9.9 at 1%, dosage 5%. Based on: surfactants, ammonia. For: metal, glass, ceramics, plastic, rubber, boards, watches, test sieves. Beware of light metals. Against: resin, soot, pigments, polishing and lapping residues, greases, oils, waxes, stains, flux.
Concentrates for ultrasonic baths TICKOPUR R 30
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Neutral cleaner, concentrate. Properties: neutral, pH 7 dosage 1 to 5%. Based on: surfactants. For: metal, light metal, glass, ceramics, plastic, rubber. Against: drilling, grinding, polishing and lapping residues,oily and greasy soiling and soot.
Concentrates for ultrasonic baths TICKOPUR J 80 U
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Deoxidiser, ready-to-use. Properties: weakly acidic, pH 1.5. Only for use in the application vessel. For: precious metals and their alloys, copper, bronze, brass. Not for light metals, steel, tin, zinc.
Concentrates for ultrasonic baths TICKOPUR R 27
Concentrates for SONOREX ultrasonic cleaning baths. Enhances cavitation, cleans intensively, kind to most materials and free from chloride. For use cold or warmed up.Special cleaner, concentrate. Properties: acid pH 1.9 at 1% solution, dosage 5%. Based on: phosphoric acid. For: steel, stainless steel, precious metal, glass, ceramic rubber, plastic. Removes: rust, lime scale, mineral residues, silicate, phosphate, cement etc.Transport regulations for dangerous goods have to be observed.
Concentrate for ultrasonic baths elma clean 65
Universally applicable neutral cleaning concentrate with corrosion inhibitor for laboratories and workshops. It as been developed in particular for use in ultrasonic baths. For cleaning of laboratory equipment and instruments made of sensitive materials and glass, plastics, metals and rubber. It removes contamination such as dust, finger prints, pigments, light greases and oils.Application concentration:Physico-chemical data:Density:1.04 g/mlpH (concentrate):~7Ingredients:5 ... 15 % anionic surfactants, 15 ... 30 % non-ionic surfactants, 5 % soaps, 5 % phosphatesUltrasonic bath:2 ... 5 %, 20 ... 80 °CImmersion bath:5 ... 20 %
Concentrate for Ultrasonic baths elma clean 70
Alkaline universal cleaning concentrate for laboratory instruments and work pieces made of glass, alkaline-resistant plastics, ceramics, rubber (excellent for breathing masks), metals, non-ferrous metals, also light metals. It removes contaminations such as oils, fats and greases, dust, soot, cokings, etc. Application concentration
Ultrasonic bath:
Immersion bath:1 ... 5 % in water, 20 ... 80 °C
5 ... 10 %Physico-chemical data:Density:1.132 g/mlpH (concentrate):~13Ingredients:5 ... 15 % anionic surfactants, 5% amphoteric surfactants, 5 ... 15 % phosphates
Concentrate for ultrasonic baths elma clean 75
Alkaline cleaning concentrate with ammonia for laboratory and workshop. For removing dirt particles, oil and greases, skin residues, grinding, polishing and lapping residues. Cleans ceramics and glassware as well as instruments/tools. Brightens precious and non-ferrous metals. Zinc, aluminium and light metal alloys may be attacked.Application concentration:Ultrasonic bath:5 ... 10 %, 20 ... 50 °CSoaking bath:10 ... 15 %, 20 ... 50 °CPhysico-chemical data:Density:0.99 ... 1.00 g/mlpH (concentrate):10.5 ... 11Ingredients:5 ... 15 % anionic surfactants, 5 ... 15 % non-ionic surfactants, 5 ... 15 % ammoniumsoap