Accessories for Laboratory conductivity meter 703
ZU 6985: 4-pole conductivity probe with integral temperature sensorZU 6945: Calibration solution for analysis and control of cell constant (1 ampoule produces 1 litre of 0.1 N salt solution)
Calibration and test material for conductivity measurements
Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cellOptimal measuring safety by PTB/NIST traceable standard solutionsEasy device check by highly precise test resistorsPharmacopeia conforming test kits
Calibration solutions TDS
Disposable bags for effective calibration. Traceability according to NIST.
Cleaning and storage solutions for pH electrodes
These solutions prolong life and restore performance of pH electrodes or are used for storage and cleaning.Cleaning solutionsCleaning solution A for removing protein contaminantsCleaning solution C for general cleaningCleaning solution D for removing oil and grease contaminantsSolutions are delivered with a small beaker and a plastic pipette.Storage solutionsEnsure the proper function of pH electrodes even after prolonged storage
Conductivity calibration solutions
Disposable bags for effective calibration. Traceability according to NIST.
Conductivity calibration solutions
For the qualified calibration of conductivity measuring systems according to ISO. The reference temperature of the calibration solution is 25 °C. Highest precision of ±0.5 %. Traceable to international standards: SRM by NIST. With quality certificate.
Conductivity cell probe TetraCon® DU/T
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.Conductivity flowthrough cell TetraCon® DU/T:4-pole conductivity cell with integral temperature sensor for standard applications. Connection via 10 mm diameter tubing nozzles (the adapter cable KKDU with 1 metre cable is required for connection). Filling volume 7 ml.
Conductivity cell probes LR 325/01
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.Ultra-pure water conductivity cell probe LR 325/01:With integral temperature sensor and flowthrough vessel D 01/T for measuring very low conductivity ranges (<1 µS/cm) e.g. boiler feed water or deionised water. Min./max. insertion depth 35/110 mm.
Conductivity cell probes TetraCon® 325
For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.Standard conductivity cell probe TetraCon® 325:4-pole cell with integral temperature sensor.Special conductivity cell probe TetraCon® 325/C:As TetraCon® 325, 4-pole cell with integral temperature sensor, but with sensor head made of chemically resistant PEEK.
Conductivity electrode CONSEN9103J
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 8-pin connector. Suitable for devices COND 610, COND 600, CD 650, PC 650 and PCD 650.
Conductivity electrode CONSEN91B
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With BNC and phono connector. Suitable for devices COND 6+, TDS 6+ and Salt 6+.
Conductivity electrode CONSEN91W
2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 6-pin connector. Suitable for devices CON 510, CON 400, CON 410, PC 300, PC 510, CON 11 and CON 110.
Conductivity measuring cells InLab®, graphite
4-electrode measuring cells made of graphite with integrated temperature sensor and fixed cable. Ideal for samples with normal and high conductivity.
Conductivity measuring cells InLab®, platinum
Electrode measuring cells made of platinum with integrated temperature sensor and fixed cable. For aggressive or organic samples.
Conductivity measuring cells InLab®, stainless steel
2-electrode measuring cells made of stainless steel with integrated temperature sensor and fixed cable. Ideal for samples with low conductivity such as pure water and ultrapure water.
Conductivity measuring cells InLab®-ISM, graphite
4-electrode measuring cells made of graphite with integrated temperature sensor and fixed cable. Ideal for samples with normal and high conductivity.ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip.
Conductivity measuring cells InLab®-ISM, stainless steel
2-electrode measuring cells made of stainless steel with integrated temperature sensor and fixed cable. Ideal for samples with low conductivity such as pure water and ultrapure water.ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip.
Conductivity measuring cells LF 435 T
With plastic shaft and internal temperature sensor NTC30 kOhm. Cable with 8-pole plug.Conductivity measuring cells with 4 electrode technique for a large measuring range of 5 µS/cm to 500 mS/cm, low maintanance and easy cleaning. For general measurements.Excellent linearity over a wide measuring range, especially for high conductivity valuesEasy cleaningLong term stable cell constant through abrasion resistant, concentric graphite electrodesIntegrated temperature sensor with short response time for automatic temperature compensation
Conductivity measuring cells LF 613 T
With plastic shaft and internal temperature sensor NTC30 kOhm. Cable with 8-pole plug.For field and laboratory measurments in a measuring range of 1 µS/cm to 2000 mS/cm. Less polarisation effects through 4 electrode measuring technique with platinum ring electrodes. Easy cleaning through removable low shaft ending.
Conductivity meter CT 830
With automatic measuring range switching.The meter is the ideal choice for determination of conductivity, salinity and temperature and combines the features for mobile application in the field with the precision and comfort of a laboratory meter. In the standard version the meter CT 830 is supplied with conuctivity sensor AT 830 C and 1.50 m cable. It is ideally suited for overall applications in the field and in laboratories. Two parallel, largely dirt-insensitive graphite electrodes, the integrated temperature sensor for parallel temperature measurement, an automatic temperature compensation and the wide measuring range are the benefits of the conductivity sensor.Scope of supply: Meter incl. conductivity sensor, calibration solution 0,1 N / KCL 1288 µs, case
Conductivity meter Eutech™ 1720
Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C
Conductivity meter Eutech™ 1720 Kit
Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, conductivity electrode CONSEN9501D, conductivity standard 1413 µS/cm, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and ChinaConductivity:0.00 µS/cm ... 500.0 mS/cmResolution (conductivity):0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cmAccuracy (conductivity):±0.5 % of measured valueTDS:0.00 ppm ... 500.0 pptResolution (TDS):0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 pptAccuracy (TDS):±0.5 % of measured valueSalinity:0.00 ... 80.0 pptResolution (salinity):0.01 ppt / 0.1 pptAccuracy (salinity):±0.5 % of measured valueTemperature:-5.0 ... 105.0 °CResolution (temperature):0.1 °CAccuracy (temperature):±0.3 °C
Conductivity meter Eutech™ CON2700
These economy Conductivity meters offer years of reliable, accurate and consistent performance. User-friendly features make the instrument an ideal research partner in laboratories, production plants and schools.Large screen that displays conductivity or TDS readings with temperature in °C or °FReady indicator lets you know when readings are stableSelectable cell constantMemory holds up to 100 data pointsAuto-ranging across 5 conductivity and TDS rangesIntegral electrode holderAdditional features CON2700Extended memory holds up to 500 data points, time and date-stamped for GLP complianceReplatinization in 5 minutes with the built-in replanitization circuitIndication of necessary recalibrationAuto-logging function for convenient continuous monitoringPassword protection for setup and calibrationSalinity and Resistivity measurementsScope of supply: Meter with integral electrode holder, conductivity probeSpecificationsConductivity range (CON2700):0.050 µS … 500.0 mSResolution:0.01 µS / 0.1 µS / 1 µS / 0.01 mS / 0.1 mSAccuracy:±1 % full scaleConductivity calibration:Auto / manual, up to 5 pointsTDS range (CON2700):0.050 ppm … 500000 ppmResolution:0.01 / 0.1 / 1 / 10 / 100 ppmAccuracy:±1 % full scaleTDS calibration:Auto / manual, 5 points per rangeSalinity range (CON2700 only):
Resolution:
Accuracy:0 ... 80000 ppm
0.01 / 0.1 / 1 / 10 / 100 ppm
±1 % full scaleSalinity calibration:Manual, 1 pointTemperature range:
Resolution:
Accuracy:0.0 … 100.0 °C
0.1 °C
±0.5 °CPower supply:100 .. 240 V adapterDimensions (W x L x H):
Weight:155 x 175 x 69 mm
650 gIP code:
Warranty:IP 54
3 years on the meter
Conductivity meter FiveGo™ F3
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter only
Conductivity meter FiveGo™ F3 Field kit
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter with LE703 sensor, carrying case
Conductivity meter FiveGo™ F3 Standard kit
Portable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environmentsScope of supply: Meter with LE703 sensor
Conductivity meter inoLab® Cond 7310
A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888.Scope of supply: Conductivity meter, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable
Conductivity meter inoLab® Cond 7310 Set 1
A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888.Scope of supply: Conductivity meter, conductivity measuring cell TetraCon® 325, 0.01 mol/l KCl conductivity standard, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable
Conductivity meter inoLab® Cond 7310P
Conductivity measurement with reliable documentation. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888. An integrated thermal printer (58 mm width) is ready for printout of the measured data.Scope of supply: Conductivity meter with integrated printer, stand, manual, batteries, universal power supply, CD-ROM with software, USB cable
Conductivity meter LAB 945
Due to the intuitive operation and robust aluminum housing the conductivity meter LAB 945 is perfect for training and routine purposes.Made in GermanyUSB InterfaceData logger (storage of up to 4000 entries: Date, time, main measured value, secondary measured value, measured temperature) with adjustable intervalNummerical password protectionSelectable user language (German, English, French and Spanish)Configurable turn-off timeSturdy aluminium housingGraphic LCD display, backlitScope of supply: Conductivity meter, stand, mains adapter
Conductivity meter Orion™ Pro Star EC212
Meter for accurate and reliable analysis of conductivity, TDS, salinity, resistivity and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (conductivity, TDS)1- to 2-point temperature calibration1-point salinity calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Conductivity meter, electrode stand, USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China
Conductivity meter Orion™ Pro Star EC212, pure water kit
Meter for accurate and reliable analysis of conductivity, TDS, salinity, resistivity and temperature. The Orion™ Pro Star features an intuitive user interface, enhanced data reporting and numerous functions. The on-screen setup wizard guides the user through important meter and measurement settings and provides on-screen tours and instructions for calibration, measurements, meter connections and electrode stand assembly. The ‘Secure Mode’ feature allows up to three administrators and 30 users individual account logins with password protection. Data can be saved as report files for easy viewing or CSV files and exported to a printer, computer or USB flash drive. The Orion™ Pro Star also supports bi-directional communication with remote commands to connect the meter to computer programs such as LIMS, HyperTerminal, PuTTY and other data collection software.Ergonomically angled 7-inch colour touchscreen displayDisplay can be operated with glovesSelectable measurement display format (basic, advanced or custom layout)‘Graph view’ displays the measured values in a curve diagram1- to 5-point calibration (conductivity, TDS)1- to 2-point temperature calibration1-point salinity calibrationUp to 10 methods can be stored per channelStores 10000 data log sets and 20 calibration logs per parameter with date and time to ensure GLP complianceDust- and water-resistant housing (IP 54)Scope of supply: Conductivity meter, electrode stand, conductivity/ATC electrode with flow cell (013016MD), conductivity standard 100 µS/cm (bottles), USB flash drive, PC cable, universal power supply with plug adapter EU, UK, US, AUS and China